Hydromatic HPGR200 Submersible Sewage Grinder Pump Description
The Hydromatic HPGR200 submersible sewage grinder pump is specifically
designed to meet the demands of residential wastewater, sewage
applications, and the quality standard of the professional plumbing
Hydromatic HPGR200 Typical Applications
- Single-Family Residences and Cottages
Hydromatic HPGR200 Superior Features
- The water resistant power cord with molded plug is available in 20 or
50 foot lengths.
- The heavy duty ball bearings, upper (radial) and lower (thrust), are
continuously lubricated by oil to ensure long service life.
- Engineered non-metallic semi-open impeller is molded to a bronze insert
for greatest torque driving capabilities. Impeller is made of high strength
Valox which provides highest level of corrosion resistance and maximum
toughness from impact for a wide variety of slurry pumping. Pump-out vanes
preclude material buildup around shaft and seal.
- The oil-filled motor provides superior cooling and permanent
lubrication of bearings, low maintenance and extended service life. 2-HP
capacitor start motors provide maximum starting torque. Motor windings
contain automatic thermal overload protection.
- The extra large stainless steel shaft eliminates corrosion and fatigue
to provide longer pump life. The minimum shaft overhang decreases
deflection and increases bearing and seal life.
- The mechanical seal is constructed with a ceramic stationary face and a
carbon rotating face, and is field-proven for long service life.
- Exclusive “Dual Cutter” design cuts solids to the smallest
particle size thereby greatly reducing clogging, roping, or binding.
- Piggyback Plug Available for Easy Maintenance
- Pump Base not Included
Hydromatic HPGR200 Technical Details
- BODY CONSTRUCTION: Class 30 Cast Iron ASTM A-48
- HORSEPOWER: 2.0 HP
- RPM: 3450
- MAXIMUM HEAD: up to 60'
- MAXIMUM CAPACITY: up to 48 GPM
- DISCHARGE PIPE SIZE: 1.25" NPT
- MAXIMUM SOLIDS HANDLING SIZE: 2"
- CORD LENGTH: 50'; Type SJOW/SJOW-A | Water Resistant
- AMP DRAW (full load): 15.0
- VOLTAGE: 1ø, 230V
- MAXIMUM LIQUID TEMPERATURE: 140°F
- MOTOR: Enclosed, Oil Cooled Induction, Cap Start
- IMPELLER CONSTRUCTION: High Strength Valox 420SEO Impeller with Bronze Insert
- IMPELLER SIZE: 4-1/4"
Hydromatic HPGR200 Pump Curve