Prev Next

Myers MW-BP Packaged Sewage System 0.5 HP 115V 20' Cord

Price: Discontinued
Retail: $744.00
+ -
Discontinued or no longer available.
SKU: MYRCMWBP


Shipping Weight:
52.0 LBS
Shipping Dimensions
Length: 20 In
Width: 23 In
Height: 32 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

myerslogopumps1.png

ITEM HAS BEEN DISCONTINUED, SEE REPLACEMENT: Myers SR24MW50 Packaged Sewage System 0.5 HP 115V 20' Cord

Myers MW-BP Sewage Basin Pro Package Description

The Myers MW-BP BasinPro Packaged Sewage System is an ideal choice for new construction or retrofit. Installer-friendly features include a 360° Top Grip for easy installation. The E-Z Switch Rod lets you easily remove the float switch without affecting the basin lid, pump or plumbing. Available with a 1/2 HP high endurance motor, with 2” solids-handling capacity. Passive radon protection provided by gas-tight seal between structural foam lid and basin.

Myers MW-BP Typical Applications

  • Sewage
  • High-Capacity Sump
  • Effluent

Myers MW-BP Features

  • MW50 Pump is pre-installed in basin, with integral torque stops to ensure stability
  • Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
  • Recessed vortex impeller for free flow of liquids, solids up to 2" diameter
  • Anti-floatation features include concrete splash lip and unique basin shape to keep the system from floating or becoming "un-installed"
  • Integral 360° top grip for easy lifting and handling in tight spaces
  • Stackable design allows for compact inventory
  • E-Z Switch Rod allows for removal of float switch without disassembling basin lid, or handling pump or plumbing. Additional clip for secondary float included; float sold separately
  • Basin is a 24" x 24" structural foam construction; 45-gallon capacity
  • Shallow 24"-deep basin reduces installation time for digging pit
  • Concrete-proof cover insert protects the system from damage during rough-in and masonry work

Myers MW50 Sewage Pump Specifications

  • BODY CONSTRUCTION: Pump: Class 30 Cast Iron / Basin: Structural Foam
  • HORSEPOWER: 0.5 HP
  • RPM: 1625
  • MAXIMUM HEAD: up to 27'
  • MAXIMUM CAPACITY: up to 135 GPM
  • FLOW AT 10' LIFT: 130 GPM
  • DISCHARGE PIPE SIZE: 2.0" NPT
  • MAXIMUM SOLIDS HANDLING SIZE: 2.0"
  • CORD LENGTH: 20'
  • AMP DRAW (full load): 9.0
  • VOLTAGE: 1ø, 115V, 60 Hz
  • MAXIMUM LIQUID TEMPERATURE: 140°F
  • IMPELLER: Thermoplastic

Myers MW50 Performance Data


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MYERS LIMITED WARRANTY

Myers® warrants to the original consumer purchaser (“Purchaser” or “You”) of the products listed below, that they will be free from defects in material and workmanship for the Warranty Period shown below

ProductWarranty Period whichever occurs first:
Jet pumps, small centrifugal pumps, submersible pumps and related
accessories
12 months from date of original installation, or 18 months from date of manufacture
Fibrewound Tanks5 years from date of original installation
Fibrewound Tanks5 years from date of original installation
Sump/Sewage/Effluent Products12 months from date of original installation, or 36 months from date of manufacture
Battery Backup Units
MBSP-2, MBSP-2C
MBSP-3, MBSP-3C
12 months from date of original installation, or 18 months from date of manufacture
24 months from date of original installation, or 30 months from date of manufacture
Wastewater Solids Handling Pumps12 months from date of shipment from factory or 18 months from date of manufacture

Our warranty applies only where such products are used in compliance with the requirements of the applicable product catalog and/or manuals. For additional information, please refer to the applicable standard limited warranty featured in the product manual.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and MYERS’s only duty, is that MYERS repair or replace defective products (at MYERS’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

MYERS SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING LIMITED WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This Limited Warranty is effective April 1, 2014 and replaces all undated warranties and warranties dated before April 1, 2014.

We've been helping customers since 1953

Trust Guard Security Scanned