Hydromatic HPGR200M2-2 Submersible Grinder Pump 2 HP 230V 1PH Manual 5.38" Imp. 50' Cord

Hydromatic HPGR200 Description

 The Hydromatic HPGR200 submersible sewage grinder pump is specifically designed to meet the demands of residential wastewater, sewage applications, and the quality standard of the professional plumbing contractor.

Hydromatic HPGR200 Typical Applications

• "high-head"
• single-family residences and cottages

Hydromatic HPGR200 Technical Details 

• Pump switch not included
• 5-3/8" Impeller standard
• Hydromatic® Patented Dual Cutter Design
• Carbon/Ceramic Type 2100 Mechanical Shaft Seal
• Oil-filled Motor with Automatic Reset Thermal Overload
• Upper and Lower Ball Bearing Construction
• Piggyback Plug Available for Easy Maintenance
• Self-Adjusting Cutters - No Need to Sim or Reset
• pumping capacity up to 58 GPM
• heads up to 105' 
• 2 HP oil cooled induction capacitor start motor
• 230 Volt, 1 Phase electrical
• 3450 RPM
• Class 30 cast iron construction
• High Strength Valox 420SEO Impeller with Bronze Insert
• 1-1/4" NPT discharge 
• 50' power cord

Hydromatic HPGR200 Superior Features 

• The water resistant power cord with molded plug is available in 20 or 50 foot lengths.
• The heavy duty ball bearings, upper (radial) and lower (thrust), are continuously lubricated by oil to ensure long service life.
• Engineered non-metallic semi-open impeller is molded to a bronze insert for greatest torque driving capabilities. Impeller is made of high strength Valox which provides highest level of corrosion resistance and maximum toughness from impact for a wide variety of slurry pumpage.  Pump-out vanes preclude material buildup around shaft and seal.
• The oil-filled motor provides superior cooling and permanent lubrication of bearings, low maintenance and extended service life. 2-HP capacitor start motors provide maximum starting torque.  Motor windings contain automatic thermal overload protection.
• The extra large stainless steel shaft eliminates corrosion and fatigue to provide longer pump life. The minimum shaft overhang decreases deflection and increases bearing and seal life.  
• The mechanical seal is constructed with a ceramic stationary face and a carbon rotating face, and is field-proven for long service life.
• Exclusive “Dual Cutter” design cuts solids to the smallest particle size thereby greatly reducin gclogging, roping, or binding.
  

Hydromatic HPGR200 Pump Curve

HPGR200 Product Resources

Download Hydromatic HPGR200 Sales Brochure

Download Hydromatic HPGR200 Performance Data

Download Hydromatic HPGR200 Installation & Service Manual