Prev Next

Hydromatic HPGR200M2-2 Submersible Grinder Pump 2 HP 230V 1PH Manual 4.25" Impeller 20' Cord

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: HTC526020047


Shipping Weight:
93.0 LBS
Shipping Dimensions
Length: 13 In
Width: 13 In
Height: 22 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic Pump Logo

Discontinued see replacement:  Hydromatic HVRS200M2-2 Grinder Pump Manual 2.0 HP 230V 1PH

Hydromatic HPGR200M2-2 Submersible Sewage Grinder Pump Description

The Hydromatic HPGR200M2 submersible sewage grinder pump is specifically designed to meet the demands of residential wastewater, sewage applications, and the quality standard of the professional plumbing contractor.

Hydromatic HPGR200M2 Typical Applications

  • "High-Head"
  • Single-Family Residences and Cottages

Hydromatic HPGR200 Superior Features

  • The water resistant power cord with molded plug is available in 20 or 50 foot lengths.
  • The heavy duty ball bearings, upper (radial) and lower (thrust), are continuously lubricated by oil to ensure long service life.
  • Engineered non-metallic semi-open impeller is molded to a bronze insert for greatest torque driving capabilities. Impeller is made of high strength Valox which provides highest level of corrosion resistance and maximum toughness from impact for a wide variety of slurry pumping. Pump-out vanes preclude material buildup around shaft and seal.
  • The oil-filled motor provides superior cooling and permanent lubrication of bearings, low maintenance and extended service life. 2-HP capacitor start motors provide maximum starting torque. Motor windings contain automatic thermal overload protection.
  • The extra large stainless steel shaft eliminates corrosion and fatigue to provide longer pump life. The minimum shaft overhang decreases deflection and increases bearing and seal life.
  • The mechanical seal is constructed with a ceramic stationary face and a carbon rotating face, and is field-proven for long service life.
  • Exclusive “Dual Cutter” design cuts solids to the smallest particle size thereby greatly reducing clogging, roping, or binding.
  • Piggyback Plug Available for Easy Maintenance
  • Wire Pump Stand Sold Seperately

Hydromatic HPGR200M2-2 Technical Details

  • BODY CONSTRUCTION: Class 30 Cast Iron ASTM A-48
  • HORSEPOWER: 2.0 HP
  • RPM: 3450
  • MAXIMUM HEAD: up to 60'
  • MAXIMUM CAPACITY: up to 48 GPM
  • DISCHARGE PIPE SIZE: 1.25" NPT
  • MAXIMUM SOLIDS HANDLING SIZE: 2"
  • CORD LENGTH: 20'; Type SJOW/SJOW-A | Water Resistant
  • AMP DRAW (full load): 15.0
  • VOLTAGE: 1ø, 230V
  • MAXIMUM LIQUID TEMPERATURE: 140°F
  • MOTOR: Enclosed, Oil Cooled Induction, Cap Start
  • IMPELLER CONSTRUCTION: High Strength Valox 420SEO Impeller with Bronze Insert
  • IMPELLER SIZE: 4-1/4"

Hydromatic HPGR200 Pump Curve

Hydromatic HPGR200 Grinder Pump Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

pentair-hydromatic-level-4.png

HYDROMATIC warrants to the original consumer purchaser (“Purchaser” or “You”) of HYDROMATIC Sump Pumps, Effluent Pumps, Sewage Pumps (other than 2-1/2"), and Package Systems, that they will be free from defects in material and workmanship for the Warranty Period of 36 months from date of manufacture.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and HYDROMATIC’s only duty, is that HYDROMATIC repair or replace defective products (at HYDROMATIC’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

EXCEPTIONS:

Exceptions are warranted for a period of 12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Hydromatic Special Application Pumps:

  • HCU15/HCU15S/HCU20S
  • HUP
  • P33A1
  • HY106
  • HPUSP125

Battery Back-Up Sump Pumps:

  • A+ Battery Back-up
  • FG-A1
  • FG-100A
  • FG-200A

Filtered Effluent Pumps:

  • HE Series

Grinder Pumps:

  • HPGR Series

2-1/2" Sewage Pumps:

  • S3S Series
  • S4S Series
  • SB3S Series
  • SB4S Series
All accessories and repair parts

HYDROMATIC SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION EXPRESSLY PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This warranty supersedes and replaces all previous warranty publications.

HYDROMATIC

740 East 9th Street, Ashland, OH 44805

Phone: 888-957-8677 • Fax: 888-840-7867 • Web Site: http://www.hydromatic.com

We've been helping customers since 1953

Trust Guard Security Scanned