Prev Next
  • Zoeller 4140-0008 Model BE4140 Sump & Effluent Double Seal Pump 1.0 HP 230V 1PH 20' Cord Automatic - ZLR4140-0008
  • Zoeller 4140-0008 Model BE4140 Sump & Effluent Double Seal Pump 1.0 HP 230V 1PH 20' Cord Automatic - ZLR4140-0008

Zoeller 4140-0008 Model BE4140 Sump & Effluent Double Seal Pump 1.0 HP 230V 1PH 20' Cord Automatic

Price: $1,057.50
Quantity:
+ -
Usually ships within 3 weeks
SKU: ZLR4140-0008


Shipping Weight:
75.0 LBS
Shipping Dimensions
Length: 12 In
Width: 10 In
Height: 12 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

zoeller-logo.jpg

Zoeller Model BE4140 Sump & Effluent Pump Description

The "Flow-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.

Zoeller Model BE4140 Sump & Effluent Pump Features and Benefits

  • Durable Cast Iron Construction
  • Features a Non-Clogging, Engineered Thermoplastic Vortex Impeller Design and Passes 1/2" (13mm) Spherical Solids
  • Oil Filled and Hermetically Sealed, Automatic Reset Thermal Overload Protection
  • Available in Both Single and Double Shaft Seal Designs
  • Carbon/Ceramic Mechanical Shaft Seals
  • Stainless Steel Bolts and Lifting Handle
  • 1-1/2" NPT Vertical Discharge
  • Operates at 130°F (54°C) in Effluent or Dewatering Applications
  • BN and BE Models Include a Variable  Level Float Switch and 1-1/2" x 2" PVC Adapter Fitting
  • Corrosion-Resistant, Powder Coated Epoxy Finish

Zoeller 4140-0008 Sump & Effluent Pump Specifications

  • VOLTAGE: 1ø, 230V, 60Hz
  • HORSEPOWER: 1.0 HP
  • AMP DRAW (full load): 6.0
  • MOTOR TYPE: Permanent Split Capacitor (PSC)
  • RPM: 3450 RPM
  • MAXIMUM HEAD: 50'
  • MAXIMUM CAPACITY: 86 GPM
  • SWITCH TYPE: Variable Level Float Switch
  • DISCHARGE PIPE SIZE: 1-1/2" NPT
  • MAXIMUM SOLIDS HANDLING: 1/2" Spherical Solid
  • IMPELLER TYPE: Engineered Thermoplastic, Non-Clogging Vortex
  • CORD LENGTH: 20' Power Cord and 15' Cord on VLFs
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM OPERATING TEMPERATURE: 130°F (54C)

Zoeller Model BE4140 Performance Curve

model-140-performance-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Zoeller Limited Warranty

Zoeller products often carry warranty terms that vary in length based on the product type. Refer to the installation manual for specific warranty term.


Manufacturer warrants,to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of one year from date of purchase. Proof of purchase is required. Parts that fail within the warranty period that inspections determine to be defective in material or workmanship will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or uncontrollable act of nature; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement,mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Support Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitationmay not apply to you. Some states do not allowthe exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned