Prev Next

Hydromatic 218 Unassembled Sewage Packaged Basin w/ SKV40 Sewage Ejector Pump

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: HTC519315017


Shipping Weight:
131.0 LBS
Shipping Dimensions
Length: 26 In
Width: 26 In
Height: 32 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic Pump Logo

Hydromatic 218 Sewage Packaged Basin Description

The Hydromatic® 218 and 218B SYSTEMS are specifically designed to meet the demands of residential wastewater and sewage applications. The SYSTEM includes the Hydromatic Model SKV40 or BV40, 4/10 HP, 115 volt sewage ejector, 2" solids handling, 2" NPT discharge. The SKV40 and BV40 can handle capacities up to 70 gallons per minute and heads up to 20 feet. The SKV40 and BV40 feature heavy-duty cast iron construction with an oil-filled motor for cooler operation, permanent lubrication of the bearings and a longer, trouble-free pump life. The SKV40 and BV40 feature a wide-angle piggyback float switch for reliable automatic operation.

The 218 and 218B SYSTEMS also include Hydromatic's 218 or 218B Sewage Basin. The 218 and 218B Basins are nestable for conserving storage space and reducing shipping costs. These super strong structural foam basins are impact resistant and corrosion proof. Extra strong upper flange prevents deflection during installation. The 218 and 218B Basins come complete with all the fittings, schedule 80 piping, swing check valve, grommets, o-rings, gasket material and hardware required so the plumber always has the complete package at the job site.

Hydromatic 218 Sewage Packaged Basin Typical Application

  • Residential wastewater
  • Residential sewage

Hydromatic 218 Sewage Packaged Basin Superior Features

  • Package includes basin, cover, check valve, discharge pipe, gasketpackage and pump
  • Features the SKV40, 4/10 HP, 2” solids handling sewage ejector with recessed impeller
  • 18”x30” basin for greater capacity, reduced cycling and extended pump life
  • Non-corrosive structural foam construction for high-impact resistance
  • Unique Hydromatic molded footprint provides pump stability

Hydromatic 218 Sewage Packaged Dimensional Data

218basindimentions.jpg

Hydromatic SKV40 Technical Details

  • Includes wide-angle "piggyback" float switch
  • Pumping capacity up to 80 GPM
  • Heads up to 18'
  • 0.4 HP
  • Shaded pole (4 pole) motor
  • 115/230 Volt, 1 phase electrical available
  • 1550 RPM
  • Cast iron motor housing and pump casing construction
  • Engineered thermoplastic impeller
  • 2" NPT discharge
  • 2" Solids Handling
  • 10' power cord std.

Hydromatic SKV40 Pump Curve

Hydromatic SKV40 Pump Performance Curve

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

pentair-hydromatic-level-4.png

HYDROMATIC warrants to the original consumer purchaser (“Purchaser” or “You”) of HYDROMATIC Sump Pumps, Effluent Pumps, Sewage Pumps (other than 2-1/2"), and Package Systems, that they will be free from defects in material and workmanship for the Warranty Period of 36 months from date of manufacture.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and HYDROMATIC’s only duty, is that HYDROMATIC repair or replace defective products (at HYDROMATIC’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

EXCEPTIONS:

Exceptions are warranted for a period of 12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Hydromatic Special Application Pumps:

  • HCU15/HCU15S/HCU20S
  • HUP
  • P33A1
  • HY106
  • HPUSP125

Battery Back-Up Sump Pumps:

  • A+ Battery Back-up
  • FG-A1
  • FG-100A
  • FG-200A

Filtered Effluent Pumps:

  • HE Series

Grinder Pumps:

  • HPGR Series

2-1/2" Sewage Pumps:

  • S3S Series
  • S4S Series
  • SB3S Series
  • SB4S Series
All accessories and repair parts

HYDROMATIC SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION EXPRESSLY PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This warranty supersedes and replaces all previous warranty publications.

HYDROMATIC

740 East 9th Street, Ashland, OH 44805

Phone: 888-957-8677 • Fax: 888-840-7867 • Web Site: http://www.hydromatic.com

We've been helping customers since 1953

Trust Guard Security Scanned