Commercial/Municipal/Industrial Supplier for Idaho. Commercial Supplier for Washington and Oregon.

Hydromatic H4Q Submersible Solids Handling Pumps Description

Hydromatic H4Q Submersible Solids Handling Pumps enhanced performance is made possible by an improved mono-vane impeller which helps eliminate clogs.

Hydromatic H4Q Typical Application

• Municipal
• Commercial
• Industrial

Hydromatic H4Q Superior Features

• Oil filled motor efficiently dissipates heat and locks out damaging moisture so you receive reliable pumping service. Easily field serviceable.
• Standard construction is cast iron.
• Stainless steel shaft eliminates corrosion and fatigue for longer pump life. The minimum shaft overhang decreases bearing and seal life. Tapered shaft allows for easy removal of impeller.
• Available with a wide range of impellers for different applications. Pump-out vanes on the top shroud prevent the buildup of materials in the seal area and extend the life of the thrust bearing by significantly reducing axial thrust.
• The connection box has two epoxy barriers and a compression fitting that prevent water contamination of the motor area, assuring long-term reliable operation. In addition, epoxy encapsulation and stripped leads postitively eliminate "wicking" from the cable
• Heavy duty upper and lower ball bearings are submerged in oil to provide permanent lubrication and ensure long service life.
• Easily replaceable, true wear ring, with a top pullout design for easy disassemble operation.
• Passes a full 3" diameter nondeformable spherical solid per the Ten States Standards.

Hydromatic H4Q4000M4-4 Technical Details

• BODY CONSTRUCTION: Class 30 cast iron
• HORSEPOWER: 40 HP
• RPM: 1750
• MAXIMUM HEAD: up to 133'
• MAXIMUM CAPACITY: up to 900 GPM
• DISCHARGE PIPE SIZE: 4" Flange 125# Discharge
• MAXIMUM SOLIDS HANDLING SIZE: 3" Spherical
• CORD LENGTH: 35' Standard
• OPTIONAL CORD LENGTH: 50'
• CORD SIZE: 6-4; Type: SOOW/W
• AMP DRAW (full load): 52.5
• VOLTAGE: 3ø, 460V
• MAXIMUM LIQUID TEMPERATURE: 140°F
• MOTOR: Enclosed, Oil Cooled Induction, VFD Suitable
• IMPELLER CONSTRUCTION: Balanced, Enclosed, 1 Vane, Ductile Iron, ASTM A536
• IMPELLER SIZE: 12"
• Section 300

Hydromatic H4Q Pump Curve

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic H4Q Product Resources

Download Hydromatic H4Q Sales Brochure

Download Hydromatic H4Q Electrical Data

Download Hydromatic H4Q Technical Data

Download Hydromatic H4Q Performance Curve

Download Hydromatic H4Q Installation & Service Manual

Download Hydromatic H4Q Dimensional Data

Download Hydromatic H4Q Specification Data