Prev Next

Hydromatic HBM200M4-4 Submersible Basin Mixer 2.0 HP 460V 3PH 35' cord

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: HTC527830017

Hydromatic Commercial/Municipal/Industrial Supplier for Idaho Only.

Shipping Weight:
82.0 LBS
Shipping Dimensions
Length: 7 In
Width: 9 In
Height: 20 In

Hydromatic Pump Logo

Discontinued

Hydromatic HBM200 Submersible Basin Mixer Description

Hydromatic HBM200 Submersible Basin Mixer keeps the contents of your basin mixed to help prevent solids from floating, grease buildup, or help keep your basin from going septic.

Hydromatic HBM200 Basin Mixer Typical Application

  • Vacation Communities
  • Industrial Areas
  • Waste Water Treatment Facilities

Hydromatic HBM200 Basin Mixer Superior Features

  • One Epoxy Barrier and One Compression Fitting for Maximum Protection Against Wicking and Water Seepage into the Motor.
  • The Heavy-Duty Ball Bearings, Upper (radial) and Lower (thrust), are Continuously Lubricated by Oil to Ensure Long Service Life.
  • Electrical Motor Design Combines the Advantages of High Torque Output with Optimum Running Efficiency and VFD Duty Rating, and is Engineered Specifically for Mixer Operation.
  • Standard Stainless Steel Shaft.
  • Dual Mechanical Seals for Maximum Moisture Protection.
  • Axial Flow Impeller is Engineered to Effectively and Efficiently Mix Basin Contents.
  • Lip Seal Keeps Unwanted Debris from Collecting Behind the Propeller.
  • Probe is Located Between Inboard and Outboard Mechanical Seals to Detect Moisture Before it Enters the Motor Chamber.

Hydromatic HBM200 Basin Mixer Key Features

  • Prevents the Lift Station from Going Septic During Periods of Low Activity, Such as with Schools During the Summer.
  • Prevents Grease Build Up in the Lift Station in Apartment Complexes, Laundromats or Prisons.
  • Break - Up Solids that Commonly Float at the Top of the Basin.
    • These Solids Build Up and can Interfere with the Proper Operation of Equipment Such as Float Controls, Lift-Outs, ect.
  • Easy to Install
    • Add to Your Current or New System
    • Install at Any Elevation or Angle to Target Trouble Spots
    • Various Permanent and Rail System Mounting Options Available
  • Vacation Communities Use for Various Mixing and Stirring Applications.
    • Industrial Areas, Waste Water.
    • Treatment Facilities
  • Oil Filled Motor Housing
    • Dissipates Heat
    • Lubricates Bearings
    • Locks Out Moisture

Hydromatic HBM200M4-4 Basin Mixer Technical Details

  • BODY CONSTRUCTION: Class 30 Cast Iron
  • HORSEPOWER: 2.0 HP
  • RPM: 1750
  • MAXIMUM FLOW: 1400 GPM
  • MAXIMUM DRY RUN: 2 Hours
  • CORD LENGTH: 35'; Type SOW/SOW-A Water Resistant 600V, 60°C
  • AMP DRAW (full load): 3.5
  • VOLTAGE: 3ø, 460V
  • MAXIMUM LIQUID TEMPERATURE: 140°F
  • MOTOR: Cast Iron ASTM-48
  • PROPELLER CONSTRUCTION: Cast Iron, ASTM A48, Class 30
  • PROPELLER TYPE: Axial Flow Propeller
  • Section 100

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

STANDARD LIMITED WARRANTY Pentair Hydromatic® warrants its products against defects in material and workmanship for a period of 12 months from the date of shipment from Pentair Hydromatic or 18 months from the manufacturing date, whichever occurs first – provided that such products are used in compliance with the requirements of the Pentair Hydromatic catalog and technical manuals for use in pumping raw sewage, municipal wastewater or similar, abrasive-free, noncorrosive liquids.

During the warranty period and subject to the conditions set forth, Pentair Hydromatic, at its discretion, will repair or replace to the original user, the parts that prove defective in materials and workmanship. Pentair Hydromatic reserves the right to change or improve its products or any portions thereof without being obligated to provide such a change or improvement for prior sold and/or shipped units.

Start-up reports and electrical schematics may be required to support warranty claims. Submit at the time of start up through the Pentair Hydromatic website: http://forms.pentairliterature.com/startupform/startupform.asp?type=h. Warranty is effective only if Pentair Hydromatic authorized control panels are used. All seal fail and heat sensing devices must be hooked up, functional and monitored or this warranty will be void. Pentair Hydromatic will cover only the lower seal and labor thereof for all dual seal pumps. Under no circumstance will Pentair Hydromatic be responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair Hydromatic service facility.

This limited warranty will not apply: (a) to defects or malfunctions resulting from failure to properly install, operate or maintain the unit in accordance with the printed instructions provided; (b) to failures resulting from abuse, accident or negligence; (c) to normal maintenance services and parts used in connection with such service; (d) to units that are not installed in accordance with applicable local codes, ordinances and good trade practices; (e) if the unit is moved from its original installation location; (f) if unit is used for purposes other than for what it is designed and manufactured; (g) to any unit that has been repaired or altered by anyone other than Pentair Hydromatic or an authorized Pentair Hydromatic service provider; (h) to any unit that has been repaired using non factory specified/ OEM parts.

Warranty Exclusions: Pentair HYDROMATIC MAKES NO EXPRESS OR IMPLIED WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Pentair HYDROMATIC SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE.

Liability Limitation: IN NO EVENT SHALL Pentair HYDROMATIC BE LIABLE OR RESPONSIBLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES RESULTING FROM OR RELATED IN ANY MANNER TO ANY Pentair HYDROMATIC PRODUCT OR PARTS THEREOF. PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY RESULT FROM IMPROPER INSTALLATION. Pentair HYDROMATIC DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY UNDER THIS WARRANTY, FOR IMPROPER INSTALLATION. Pentair HYDROMATIC RECOMMENDS INSTALLATION BY PROFESSIONALS.

Some states do not permit some or all of the above warranty limitations or the exclusion or limitation of incidental or consequential damages and therefore such limitations may not apply to you. No warranties or representations at any time made by any representatives of Pentair Hydromatic shall vary or expand the provision hereof.

We've been helping customers since 1953

Trust Guard Security Scanned