Prev Next

Hydromatic HBMX200DB Hazardous Submersible Basin Mixer 2.0 HP 200V 3PH 35' cord

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: HTC527835037

Hydromatic Commercial/Municipal/Industrial Supplier for Idaho Only.

Shipping Weight:
88.0 LBS
Shipping Dimensions
Length: 6 In
Width: 9 In
Height: 22 In

Hydromatic Pump Logo

Discontinued

Hydromatic HBMX200 Hazardous Submersible Basin Mixer Description

Hydromatic HBMX200 Hazardous Submersible Basin Mixer keeps the contents of your basin mixed to help prevent solids from floating, grease buildup, or help keep your basin from going septic.

Hydromatic HBMX200 Basin Mixer Typical Application

  • Vacation Communities
  • Industrial Areas
  • Waste Water Treatment Facilities
  • Hazardous Locations Class I, Division 1, Groups C & D

Hydromatic HBMX200 Basin Mixer Superior Features

  • One Epoxy Barrier and One Compression Fitting for Maximum Protection Against Wicking and Water Seepage into the Motor.
  • The Heavy-Duty Ball Bearings, Upper (radial) and Lower (thrust), are Continuously Lubricated by Oil to Ensure Long Service Life.
  • Electrical Motor Design Combines the Advantages of High Torque Output with Optimum Running Efficiency and VFD Duty Rating, and is Engineered Specifically for Mixer Operation.
  • Standard Stainless Steel Shaft.
  • Dual Mechanical Seals for Maximum Moisture Protection.
  • Axial Flow Impeller is Engineered to Effectively and Efficiently Mix Basin Contents.
  • Probe is Located Between Inboard and Outboard Mechanical Seals to Detect Moisture Before it Enters the Motor Chamber.
  • Axial Flow Impeller is Engineered to Effectively and Efficiently Mix Basin Contents.
  • Lip Seal Keeps Unwanted Debris from Collecting Behind the Propeller.

Hydromatic HBMX200 Basin Mixer Key Features

  • Prevents the Lift Station from Going Septic During Periods of Low Activity, Such as with Schools During the Summer.
  • Prevents Grease Build Up in the Lift Station in Apartment Complexes, Laundromats or Prisons.
  • Break - Up Solids that Commonly Float at the Top of the Basin.
    • These Solids Build Up and can Interfere with the Proper Operation of Equipment Such as Float Controls, Lift-Outs, ect.
  • Oil Filled Motor Housing
    • Dissipates Heat
    • Lubricates Bearings
    • Locks Out Moisture
  • HBMX200 CSA Hazardous Location Approved
    • Add to your Current or New Lift Station
    • Install at any Elevation or Angle to Target Trouble Spots
    • Various Permanent and Rail System Mounting Options Available

Hydromatic HBMX200DB Basin Mixer Technical Details

  • BODY CONSTRUCTION: Class 30 Cast Iron
  • HORSEPOWER: 2.0 HP
  • RPM: 1150
  • MAXIMUM FLOW: 1400 GPM
  • MAXIMUM DRY RUN: 2 Hours
  • CORD LENGTH: 35'; Type SOW/SOW-A Water Resistant 600V, 60°C
  • AMP DRAW (full load): 5.5
  • VOLTAGE: 3ø, 200V
  • MAXIMUM LIQUID TEMPERATURE: 140°F
  • MOTOR: Cast Iron ASTM-48
  • PROPELLER CONSTRUCTION: Cast Iron, ASTM A48, Class 30
  • PROPELLER TYPE: Axial Flow Propeller
  • Section 100

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

pentair-hydromatic-level-4.png

HYDROMATIC warrants to the original consumer purchaser (“Purchaser” or “You”) of HYDROMATIC Sump Pumps, Effluent Pumps, Sewage Pumps (other than 2-1/2"), and Package Systems, that they will be free from defects in material and workmanship for the Warranty Period of 36 months from date of manufacture.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and HYDROMATIC’s only duty, is that HYDROMATIC repair or replace defective products (at HYDROMATIC’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

EXCEPTIONS:

Exceptions are warranted for a period of 12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Hydromatic Special Application Pumps:

  • HCU15/HCU15S/HCU20S
  • HUP
  • P33A1
  • HY106
  • HPUSP125

Battery Back-Up Sump Pumps:

  • A+ Battery Back-up
  • FG-A1
  • FG-100A
  • FG-200A

Filtered Effluent Pumps:

  • HE Series

Grinder Pumps:

  • HPGR Series

2-1/2" Sewage Pumps:

  • S3S Series
  • S4S Series
  • SB3S Series
  • SB4S Series
All accessories and repair parts

HYDROMATIC SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION EXPRESSLY PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This warranty supersedes and replaces all previous warranty publications.

HYDROMATIC

740 East 9th Street, Ashland, OH 44805

Phone: 888-957-8677 • Fax: 888-840-7867 • Web Site: http://www.hydromatic.com

We've been helping customers since 1953

Trust Guard Security Scanned