Skip to product information
1 of 1

Hydromatic HPD200M2-4 Submersible Positive Displacement Grinder Pump Manual 2.0 HP 230V 1PH

Hydromatic HPD200M2-4 Submersible Positive Displacement Grinder Pump Manual 2.0 HP 230V 1PH


Discontinued or no longer available.

SKU : HTC526320007

In Stock Quantity:0

:
Brand : Hydromatic Pump
Shipping calculated at checkout.
 More payment options

Pickup available at Coeur d'Alene

Usually ready in 24 hours

Description

Hydromatic Pump Logo

Hydromatic HPD200 Submersible Sewage Positive Displacement Grinder Pump Description

Hydromatic HPD200 Submersible Sewage Positive Displacement Grinder Pump is specifically designed to meet the demands of Residential Wastewater and Sewage Applications.

Hydromatic HPD200 Typical Application

  • Residential Wastewater and Sewage
  • Low Pressure Sewer System Applications

Hydromatic HPD200 Superior Features

  • The heavy duty ball bearings, upper (radial) and lower (thrust), are continuously lubricated by oil to ensure long service life.
  • The oil-filled motor provides superior cooling and permanent lubrication of bearings, low maintenance and extended service life. The 2 HP capacitor start motors provide maximum starting torque. Motor windings contain automatic thermal overload protection.
  • Constructed with a ceramic stationary face and a carbon rotating face, and is field proven for long service life.
  • 300 Series SST single lobe rotor.
  • Buna-N double helix stator.
  • Grinding cutter design cuts solids to smallest particle size, thereby greatly reducing clogging, roping or binding.

Hydromatic HPD200 Key Features

  • Engineered for low pressure sewer system applications
  • Available in complete package systems for quick installations
  • No control panel required
  • 1-1/4" NPT discharge pump with a vertical discharge that conquers capacities up to 17-1/2 gallons per minute and heads up to 220 feet
  • CSA Approved
  • Available configurations, rails and accessories:
    • Rail Systems Available
    • Controls and Accessories Available
  • Wire Mounting Stand Not Include

Hydromatic HPD200M2-4 Technical Details

  • BODY CONSTRUCTION: Class 30 Cast Iron
  • HORSEPOWER: 2.0 HP
  • RPM: 1750
  • MAXIMUM HEAD: up to 230'
  • MAXIMUM CAPACITY: up to 19 GPM
  • DISCHARGE PIPE SIZE: 1.25" NPT Discharge
  • CORD LENGTH: 20' Standard; Type SJOOW
  • AMP DRAW (full load): 12.0
  • VOLTAGE: 1ø, 230V
  • MAXIMUM LIQUID TEMPERATURE: 140°F
  • Section 200

Hydromatic HPD200 Pump Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic S3S200M2-4 Submersible Sewage pumps Description

Hydromatic Pump Logo

Hydromatic S3S200M2-4 Submersible Sewage pumps Description

Hydromatic S3S Submersible Sewage pumps are suited to wet-well installation in a wide variety of municipal, industrial and building trades applications.

Hydromatic S3S Typical Application

  • Municipal Sewage Lift Stations
  • Industrial Sewage Transfer
  • Dewatering of Storm Water

Hydromatic S3S Superior Features

  • Oil-Filled Motor for Cooler Operation, Longer Life, and Less Maintenance. The Dielectric Oil Effectively Dissipates Heat and Lubricates Upper and Lower Ball Bearings.
  • Single Phase Motors are Capacitor Start, Capacitor Run with Capacitors Located in Control Panel. Contact distributor for Proper Hydromatic Control Panel Sizing.
  • Standard Construction is Cast Iron.
  • 300 Series Stainless Steel Shafts.
  • 35' Power Cord has Three Conductor PVC Jacket.
  • Field Serviceable; Pumps have 300 Series Stainless Steel Fasteners for Easy Tear Down.
  • Semi-Open, Two-Vane Sewage Type Impellers have Pump-Out Vanes on Back Shrouds to Prevent Stringy Materials from Building up Around Shaft and Seal.
  • Manufactured with Carbon and Ceramic Faced Mechanical Shaft Seal for Long Leak Proof Life.
  • All Units Given Complete Hydraulic Test Run Before Shipping.
View full details

PUMPS, WATER & WASTE WATER TREATMENT AND A WHOLE LOT MORE

Dedicated to deliver the highest quality products, and services in the water and wastewater industry, and with the help of our well-trained staff, provide a lasting value to each customer we support... read more

HELPING CUSTOMERS SINCE 1953

As time-tested specialists in water and waste water pumping systems, we are your best choice for pumps and related equipment.

  • Wastewater Treatment Systems
  • Sump Pump Systems
  • UV Water Purification & Treatment
  • Irrigation Pump Systems
  • Storm Water Lift Stations
  • Water Well Pump Systems

OUR CUSTOMERS REVIEWS