Commercial/Municipal/Industrial Supplier for Idaho. Commercial Supplier for Washington and Oregon.

Hydromatic HPGH Submersible Sewage Grinder Pump Description

Hydromatic HPGH Submersible Sewage Grinder Pump is designed to meet the demands of Residential, Commercial and Resort Areas.

Hydromatic HPGH Typical Application

• Residential
• Commercial
• Resort Area

Hydromatic HPGH Superior Features

• One epoxy barrier and one compression fitting for maximum protection against wicking and water seepage into the motor housing.
• The heavy-duty ball bearings, upper (radial) and lower (thrust), are continuously lubricated by oil to ensure long service life.
• Electrical motor design combines the advantages of high torque output with optimum running efficiency engineered specifically for grinder operation.
• The stator is secured to the motor housing by means of stator bolts and retaining ring which ensure ease of maintenance if the need ever arises.
• Standard stainless steel shaft in grinder pump
• Dual seals for maximum moisture protection.
• Moisture detection probe.
• Exclusive “Dual Cutter” design cuts solids to smallest particle size, thereby greatly reducing clogging, roping, or binding.
• Standard impeller provides highest level of corrosion resistance and maximum toughness from impact for a wide variety of slurry pumpage. Pump-out vanes preclude material buildup around shaft and seal.

Hydromatic HPGH Key Features

• Explosion-proof
• Class 1, Division 1, Groups C & D
• Dual seals for maximum moisture protection
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication
• Exclusive dual cutter design cuts solids to the smallest particle size
• Semi-open impeller provides steep non-overloading operating curve
• Available configurations, rails and accessories:
  • Rail Systems Available
  • Controls and Accessories Available

Hydromatic HPGH500M7-2 Technical Details

• BODY CONSTRUCTION: Class 30 Cast Iron
• HORSEPOWER: 5.0 HP
• RPM: 3450
• MAXIMUM HEAD: up to 155'
• MAXIMUM CAPACITY: up to 115 GPM
• DISCHARGE PIPE SIZE: 2" NPT Discharge
• CORD LENGTH: 35' Standard
• CORD SIZE: 8-4; Type: SOOW, W
• AMP DRAW (full load): 33.9
• VOLTAGE: 1ø, 200V
• MAXIMUM LIQUID TEMPERATURE: 140°F
• MOTOR: Enclosed, Oil Cooled Induction
• IMPELLER CONSTRUCTION: Semi-Open 5 Vane, Red Brass #85-5-5-5, ASTM B584-836
• IMPELLER SIZE: 6.25"

Hydromatic HPGH Pump Curve

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic HPGH Product Resources

Download Hydromatic HPGH Sales Brochure

Download Hydromatic HPGH Electrical Data

Download Hydromatic HPGH Technical Data

Download Hydromatic HPGH Performance Curve

Download Hydromatic HPGH Installation & Service Manual

Download Hydromatic HPGH Dimensional Data

Download Hydromatic HPGH Specification Data