Commercial/Municipal/Industrial Supplier for Idaho. Commercial Supplier for Washington and Oregon.

Hydromatic S3W200M6-2 Solids Handling Wastewater Pumps Description

Strong Cast Iron performer designed for residential raw sewage and light commercial applications.

Hydromatic S3W Typical Application

• Residential Raw Sewage
• Light Commercial Applications

Hydromatic S3W Superior Features

• Two-Vaned Rounded Port Impellers
• Offered in Two Speeds
• Hydraulic End Virtually Maintenance-Free
• Volute Seal Ring Replaceable in Minutes
• Oil-Filled Motor for Constant Bearing Lubrication
• High Torque, Permanent Split Capacitor (PSC), Single-Phase Motors
• No starting switches or relays
• Current and Temperature Overload

Hydromatic S3W200M6-2 Specifications

• BODY CONSTRUCTION: Class 30 Cast Iron; ASTM A48
• HORSEPOWER: 2.0 HP
• RPM: 3450
• MAXIMUM HEAD: up to 75 ft.
• MAXIMUM CAPACITY: up to 170 GPM
• SWITCH TYPE: Control Panel Required
• MINIMUM SUMP DIAMETER: Duplex = 48" (1219.2 mm)
• DISCHARGE PIPE SIZE: 3" (76.2 mm) NPT Vertical
• MAXIMUM SOLIDS HANDLING SIZE: 2" (50.6 mm)
• CORD LENGTH: 20' Standard
• CORD SIZE: 14-4; Type: SOOW
• START AMPS: 53.0 RUN AMPS: 13.0
• VOLTAGE: 3ø, 208V, 60Hz
• MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)
• MOTOR: Enclosed, Oil Cooled Induction
• IMPELLER CONSTRUCTION: Ductile Iron; Class 65; ASTM A536

Hydromatic S3W Pump Curve

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic S3W Product Resources

Download Hydromatic S3W Sales Brochure

Download Hydromatic S3W Installation & Service Manual

Download Hydromatic S3W Technical Data

Download Hydromatic S3W Electrical Data 3450 RPM

Download Hydromatic S3W Dimensional Drawing 3450 RPM