Commercial/Municipal/Industrial Supplier for Idaho. Commercial Supplier for Washington and Oregon.

Item Discontinued, See Replacement: Myers SX50-21PS Simplex Explosion-Proof Pump/Control Package 0.5HP 1 PH 230 V

Hydromatic SPX50M2 Description

Hydromatic SPX50 and SPX50H are specifically designed to pump contaminated effluent and water.The SPX50/SPX50H is UL and CSA approved(Class 1, Division 1, Group D) to handle a wide variety of pollutants, including gas and oil.

Hydromatic SPX50 Typical Application

• Class I, Division I, Group D hazardous locations

Hydromatic SPX50 Superior Features

• Carbon/Ceramic mechanical seal
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Recessed impeller reduces radial bearing loads, increases bearing life
• High torque capacitor start, single phase motor for assured starting under heavy load
• Seal leak probes warn of seal leak condition.
• On winding heat sensors will stop motor in case of over-heating to prevent costly motor damage.
• Hydromatic SPX50/SPX50H is recommended to be sold/used with AFS S2 IR2 HS RO Cap Hydromatic SPX50 Simplex Control Panel

Hydromatic SPX50M2 Technical Details

• BODY CONSTRUCTION: Cast Iron ASTM-48, 76
• HORSEPOWER: 0.5 HP
• RPM: 1750
• MAXIMUM HEAD: up to 25'
• MAXIMUM CAPACITY: up to 95 GPM
• DISCHARGE PIPE SIZE: 2" NPT Discharge
• MAXIMUM SOLIDS HANDLING SIZE: 2"
• CORD LENGTH: 20'; Type SOW/SOW-A | Water Resistant
• VOLTAGE: 1ø, 230V
• FULL LOAD AMPS: 5.3
• MAXIMUM LIQUID TEMPERATURE: 140°F
• MOTOR: Oil Cooled Induction, Capacitor Start
• IMPELLER CONSTRUCTION: Recessed, cast iron class 20 A-48-62

Hydromatic SPX50 Pump Curve

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Hydromatic SPX50 Product Resources

Download Hydromatic SPX50 Sales Brochure

Download Hydromatic SPX50 Performance Data

Download Hydromatic SPX50 Installation & Service Manual