
DISCONTINUED
Myers Model 3RH/3RHX Description
The Myers 3RH and 3RHX (hazardous location) Submersible Wastewater Pumps are the right choice when difficult to fibrous or stringy solids are to be expected. The 3RH/3RHX Series provides smooth, vibration-free operation when operating at heads higher than peak efficiency. For use in commercial lift stations, treatment plants and industrial waste applications.
Myers Model 3RH/3RHX Typical Application
- Commercial Lift Stations
- Treatment Plants
- Industrial Waste Applications
Myers Model 3RH/3RHX Superior Features
- Cable Entry System Provides Double Seal Protection, Cable Jacket Sealed by Compression Grommet and Individual Wires Sealed by Epoxy Potting.
- Heat Sensor Protects Motor from Burnout Due to Excessive heat from any overload condition. Automatically Resets when Motor has Cooled.
- Motor Stator Heat Shrunk into Housing for Perfect Alignment and Best Heat Transfer. Oil-Filled Motor Conducts Heat and Lubricates Bearings.
- Upper and Lower Ball Bearings Support Shaft and Rotor and Take Axial and Radial Loads.
- Double Tandem Mechanical Shaft Seals Protect Motor. Oil-Filled Seal Chamber Provides Continuous Lubrication.
- Seal Leak Probes Detect Water in Seal Housing. Activate Warning Light in Control Panel.
- Heavy Corrosion Resistant 416 SST Shaft.
- Sleeve Bearing takes Radial Shock Load; Provides Flame Path.
- Volute Case Handles 2" Solids. Completely Open from Inlet to Discharge 3" ANSI 125 lb. Flange.
- Recessed Impeller Handles Stringy Trash and Slurries without Clogging or Binding. Pump Out Vanes Help Keep Trash from Seal; Reduces Pressure at Seal Faces.