Myers MBSP Battery Standby Pump System
The Myers
® MBSP battery operated back-up sump pump is
designed to back up primary residential sump pumps in case of pump or power
failure. A must for those installations where an inoperative sump pump can
not be tolerated. Separate float switch and built-in alarm automatically
starts back-up system and activates warning buzzer to protect against high
water damage and warn of primary pump failure. Battery not included with
system.
Myers MBSP Typical Applications
- Critical sump pump application
Myers MBSP Features
- Backs up residential sump pump automatically during power outage or
pump failure (primary pump and piping not included)
- Continuous self-charging system
- Solid-state controller monitors battery charge and pump operation
- Alarm sounds when standby pump activates
- Area light lights up dark, powerless work area
- Works with flooded and sealed AGM deep cycle lead-acid battery
- Re-settable circuit breaker eliminates the need for a fuse
- 2A 5-stage charger
- Controller includes connectors for pump, charger, float switch and
battery.
- Deep cycle marine-type battery (Group 24) recommended - not included
with MBSP system
Myers MBSP Specifications
- BODY CONSTRUCTION: Thermoplastic
- HORSEPOWER: 1/4 HP
- MAXIMUM HEAD: up to 16' ft.
- MAXIMUM CAPACITY: up to 33 GPM
- FLOW AT 10' LIFT: 20 GPM
- SWITCH TYPE: Vertical Float
- MINIMUM SUMP DIAMETER: 13-1/2" Wide if at Least 22" Deep OR 18" Wide if at Least 18" to 22" Deep
- DISCHARGE PIPE SIZE: 1¼"
- AMP DRAW (full load): 2
- VOLTAGE: 115V AC, 60 Hz Input/ 12V DC out to Pump
- MAXIMUM LIQUID TEMPERATURE: 77°F (25C)
Myers MBSP Performance Data
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov