Prev Next

Myers MEOSP50A1-20 Submersible Effluent Pump 0.5 HP 115V 1PH 20' Cord Automatic

Usually ships within 2 weeks
SKU: MYR28214D001


Shipping Weight:
49.0 LBS
Shipping Dimensions
Length: 17 In
Width: 14 In
Height: 12 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

myerslogopumps1.png

Myers MEOSP50 Submersible Effluent Pump Description

The Myers MEOSP50 Submersible Pump is specifically designed to meet the demands of residential sump, elevator pit, septic tank effluent, industrial circulator and transfer tank applications and is available in either cast iron or naval bronze corrosion resistant material.

MYERS MEOSP50 Submersible Effluent Pump Typical Application

  • Continuous Duty Application
  • Septic Tank Effluent
  • Flood Control Units
  • Industrial Circulators
  • Elevator Pits
  • Basement Sumps

Myers MEOSP50 Submersible Effluent Pump Typical Application

  • Water-Resistant Power Cord with Molded Plug is Available in 10 or 20 foot Lengths and is Easy Field Serviceable.
  • Upper and Lower Ball Bearings Support Motor Shaft, Minimizing the Effects of Impeller Thrust Loads. This Design Results in Minimum Friction and Perfect Alignment of Rotor for Longer Service from Pump.
  • Oil-Filled Motor Provides Superior Cooling and Permanent Lubrication for Bearings, Minimizing Maintenance and Extending Service Life.
  • Powerful 1/2 HP Motor Runs Cool and Quiet for Long Life. Motor Windings Contain Automatic-Reset, Thermal Overload Protection.
  • Mechanical Shaft Seal is Carbon- and Ceramic-Faced for Long Leakproof Life.
  • Heavy-Duty, Cast Iron Construction Provides Long Life in Rugged Applications.
  • Discharge is 1.5" NPT.
  • The Impeller which is Threaded to a Stainless Steel Shaft, Provides Long Life in Corrosive Applications and is Capable of Handling up to 5/8" Spherical Solids and Lint.
  • Bottom-Suction Design Alleviates Buildup of Debris, Providing Optimum Pump Performance and Reduced Maintenance.
  • Automatic Pump Operation – “Piggyback” Diaphragm Switch Included

Myers MEOSP50A1 Submersible Effluent Pump Technical Details

  • VOLTAGE: 1ø, 115V, 60 Hz
  • HORSEPOWER: 0.5 HP
  • AMP DRAW (full load): 9.5
  • MOTOR TYPE: Permanent Split Capacitor (PSC)
  • RPM: 1750
  • MAXIMUM HEAD: 25'
  • MAXIMUM CAPACITY: 60 GPM
  • SWITCH TYPE: Piggyback Diaphragm Switch
  • MINIMUM SUMP DIAMETER: Simplex: 24” Duplex: 36”
  • DISCHARGE PIPE SIZE: 1-1/2" NPT
  • MAXIMUM SOLIDS HANDLING SIZE: 5/8"
  • IMPELLER TYPE: Reinforced Thermoplastic
  • CORD LENGTH: 20'
  • CORD SIZE: 16-3; Type: SJTW, SJTOOW
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)

Myers MEOSP50 Submersible Effluent Pump Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Myers MEOSP50 Submersible Effluent Pump Product Resources

product-resourcesb.png

Download Myers MEOSP50 Sales Brochure

Download Myers MEOSP50 Installation & Service Manual

MYERS LIMITED WARRANTY

Myers® warrants to the original consumer purchaser (“Purchaser” or “You”) of the products listed below, that they will be free from defects in material and workmanship for the Warranty Period shown below

ProductWarranty Period whichever occurs first:
Jet pumps, small centrifugal pumps, submersible pumps and related
accessories
12 months from date of original installation, or 18 months from date of manufacture
Fibrewound Tanks5 years from date of original installation
Fibrewound Tanks5 years from date of original installation
Sump/Sewage/Effluent Products12 months from date of original installation, or 36 months from date of manufacture
Battery Backup Units
MBSP-2, MBSP-2C
MBSP-3, MBSP-3C
12 months from date of original installation, or 18 months from date of manufacture
24 months from date of original installation, or 30 months from date of manufacture
Wastewater Solids Handling Pumps12 months from date of shipment from factory or 18 months from date of manufacture

Our warranty applies only where such products are used in compliance with the requirements of the applicable product catalog and/or manuals. For additional information, please refer to the applicable standard limited warranty featured in the product manual.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and MYERS’s only duty, is that MYERS repair or replace defective products (at MYERS’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

MYERS SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING LIMITED WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This Limited Warranty is effective April 1, 2014 and replaces all undated warranties and warranties dated before April 1, 2014.

We've been helping customers since 1953

Trust Guard Security Scanned