Prev Next

Pentek P43B0010A2-C XE Series 4" Submersible Motor 1.0 HP 230V 3-Wire 1PH

Price: $305.50
Quantity:
+ -
Usually ships within 2 weeks
SKU: PTKP43B0010A2C


Shipping Weight:
23.0 LBS
Shipping Dimensions
Length: 12 In
Width: 3 In
Height: 4 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

myerslogopumps1.png

Pentek XE Series 4" Submersible Motor Description

The Pentek XE Series 4" Submersible High-Thrust Motors are built with the latest design, manufacturing and testing technology. They feature laser-welded 304L stainless steel construction, higher thrust capacities and higher efficiencies. The Pentek XE Series submersible motors incorporate "encapsulated, epoxy stator design," and proffesional-grade Class F insulation provides longer life in harsh environments. Each motor is 100% factory pressure and run tested to support our quality standards.

Pentek XE Series 4" Submersible Motor Key Features

  • Oversized Kingsbury-Type Thrust Bearing Design-Large High-Performance Bearings are Standard on all HPs Alowing for Higher Thrust Loads, Providing Many Years of Trouble-Free Service under Severe-Duty Operation.
  • 3-Wire Motors Operate with Pentek SMC-CR, VIP Pro and Pentek Intellidrive™ Products
  • All Stainless Steel Exterior
  • Professional-Grade Class F-Compliant Motor Insulation-Allows for Longer Service Life.
  • Automatic Thermal Protection
  • All 115V and 230V Motors are Equipped with Surge Arrestors to Provide Maximum Protection against Lightning, Transient and Voltage Surge Conditions.

Pentek XE Series 4" Submersible Motor Specifications

  • HERTZ: 60 Hz
  • HORSE POWER: 1.0 HP
  • VOLTAGE: 230 V
  • PHASE: 3 PH
  • SERVICE FACTOR: 1.4
  • FULL LOAD AMPS (YBR): 8.4/8.4/0
  • MAX WATER TEMP: 86°F/30°C
  • LENGTH (inches): 12"
  • SHELL: 304L Stainless Steel, Laser Welded to End Bells
  • MOTOR SHAFT: 17-4 Precipitation Hardened SS
  • INSULATION: Class F, 311°F (155°C)
  • FASTNERS: 304-Grade Stainless Steel
  • LIP SEAL: Nitrile
  • SAND BOOT: Nitrile
  • CABLE: Field-Serviceable, Controlled Compression Design UL, CSA, NSF Approved
  • CABLE LENGTH: 48"
  • DIAPHRAM: EPDM
  • THRUST BEARINGS: Kingsbury-Type, Pivot Show, Carbon Graphite Mating Ring
  • THRUST LOAD CAPACITY: 700


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MYERS LIMITED WARRANTY

SUMP & RESIDENTIAL SEWAGE

During the time periods and subject to the conditions hereinafter set forth, F.E. Myers will repair or replace to the original user or consumer any portion of your new MYERS product which proves defective due to defective materials or workmanship of MYERS. Contact your nearest Authorized MYERS Dealer for warranty service. At all times MYERS shall have and possess the sole right and option to determine whether to repair or replace defective equipment, parts, or components. Damage due to lightning or conditions or beyond the control of MYERS is NOT COVERED BY THIS WARRANTY.

WARRANTY PERIOD

Pumps: 18 months from date of manufacture or 12 months from date of purchase, whichever comes first.

Grinder Pumps: 12 months from date of original installation, or 18 months from date of manufacture, whichever comes first.

Exclusions apply, see individual products for specific warranty coverage.

Labor, etc. Costs: MYERS shall IN NO EVENT be responsible or liable for the cost of field labor or other charges incurred by any customer in removing and/or re-affixing any MYERS product, part or component thereof.

THIS WARRANTY WILL NOT APPLY: (a) to defects or malfunctions resulting from failure to properly install, operate or maintain the unit in accordance with printed instructions provided; (b) to failures resulting from abuse, accident or negligence; (c) to normal maintenance services and the parts used in connection with such service; (d) to units which are not installed in accordance with applicable local codes, ordinances and good trade practices; or (e) unit is used for purposes other than for what it was designed and manufactured, and (f) if three-phase submersible motors are installed on a single-phase power supply suing a phase converter or if three-phase power is supplied by only two transformers, making an open Delta system.

RETURN OR REPLACED COMPONENTS: Any item to be replaced under this Warranty must be returned to MYERS in Ashland, Ohio or such other place as MYERS may designate, freight prepaid.

PRODUCT IMPROVEMENTS: MYERS reserves the right to change or improve its products or any portions thereof without being obligated to provided such a change or improvement for units sold and/or shipped prior to such a change or improvement.

WARRANTY EXCLUSIONS: MYERS SPECIFICALLY DESCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AFTER THE TERMINATION OF THE WARRANTY PERIOD SET FORTH HEREIN.

Some states do not permit some or all of the above warranty limitations and, therefore, such limitations may not apply to you. No warranties or representations at any time made by any representative of MYERS shall vary or expand the provisions hereof.

LIABILITY LIMITATION: IN NO EVENT SHALL MYERS BE LIABLE OR RESPONSIBLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES RESULTING FROM OR RELATED IN ANY MANNER TO ANY MYERS PRODUCT OR PARTS THEREOF. PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY RESULT FROM IMPROPER INSTALLATION. MYERS DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY UNDER THIS WARRANTY, FOR IMPROPER INSTALLATION-MYERS RECOMMENDS FOLLOWING THE INSTRUCTIONS IN THE INSTALLATION MANUAL WHEN IN DOUBT, CONSULT A PROFESSIONAL.

Some states do not permit some or all of the above warranty limitations and, therefore, such limitations may not apply to you.

This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

In the absence of suitable proof of the purchase date, the effective date of this Warranty will be based upon the date of manufacture.

DETERMINATION OF UNIT DATE OF MANUFACTURE: Submersible Sump Pump (8-95) month and year stamped on pump nameplate; Colum Sump Pump month and year on red warranty tag.


We've been helping customers since 1953