Simplex control panels can be used for pressure sewer (STEP) systems, onsite treatment systems, and pump control into conventional gravity or pressurized drainfields. “A” series pump control panels are a low cost option for simplex pump and alarm system applications. These panels do not include a motor contactor, but switch the pump load directly through the liquid level control float.

Orenco A Series Simplex Control Panel Typical Application

• Residential and Light Commercial Sump, Septic Tank Effluent, and Raw Sewage Pumping Applications.
• Additional Features
• RO - Redundant Pump Shut OFF Under Low Tank Level Conditions Visual/Audible Alarm Activated

Orenco A Series Simplex Control Panel Specifications

• Hand-Off-Auto Switch
• 10A Control Breaker (Requires 120 VAC control power)
• 16A (115V) or 10A (240V) Panel Rating
• Audible Alarm: 95 dB at 24", Warble Tone Sound
• Visual Alarm: 7/8" diameter red lens, "Push-To-Silence", LED Light
• Eclosure: 9.5"H x 7.3"W x 5"D, NEMA 4X, UV-Resistant Fiberglass, Stainless Steel Latch and Hinge

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Orenco A Series Simplex Control Panel Product Resources

Brochure
Orenco A Series Simplex Control Panel Submittal Data Sheet: ESU-CP-A-1

Orenco A Series Simplex Control Panel Technical Data Sheet: NTD-CP-A-1

Wiring Diagram
Orenco A2 RO Simplex Control Panel Wiring Diagram: EDW-WD-A-4

Float Arrangement Diagram
Orenco A RO Series Simplex Control Panel Float Arrangement Diagram: EDW-FA-A-2

Splice Box Wiring Diagram
Orenco A RO Series Simplex Control Panel Splice Box Wiring Diagram: EDW-SB-A-4