Orenco high-head effluent pumps are manufactured specifically for wastewater applications, to transport filtered effluent from septic tanks. High-head capabilities make them the ideal choice for STEP effluent sewer systems. Steep pump curves provide high-pressure capacity to clear plugged orifices in pressurized distribution systems. Orenco high-head effluent pumps possess a high cycling capability (up to 300 cycles/day on most models), which is needed for optimum treatment in many of today’s high performance onsite systems. 60-Hz 1/2 hp to 1-1/2 hp pumps are UL and CSA listed for use in effluent. 5-year extended warranty included with all PF series pumps. PF pumps include an SOOW type cable, suitable for Class I, Division 1 and 2 applications (check local codes).

Orenco High Head Effluent Pump Typical Application

• Residential Septic Tank Effluent
• Disposal System Dosing
• Treatment System Dosing

Orenco High Head Effluent Pump Technical Details

• Minimum 24-Hour Run-Dry Capability with no Deterioration in Pump Life or Performance
• 1⁄8-inch (3-mm) by Pass Orifice (patent pending) to Ensure Flow Recirculation for Motor Cooling and to Prevent Air Bind
• Liquid End Repair Kits Available for Better Long-Term Cost of Ownership
• TRI-SEAL™ Floating Impeller Design on 10, 20, and 30 GPM (0.6, 1.3, and 1.9 L/sec) Models; Floating Stack Design on 50 and 75 GPM (3.2 and 4.7 L/sec) Models

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

How to repair an Orenco High Head Effluent pump from Orenco Systems on Vimeo.  Video Produced by Orenco Systems Inc.