Discontinued
Power-Flo PFEH Series Effluent Pump Description
General Purpose pump for residential, light industrial and commercial sump or effluent applications
Power-Flo PFEH Series Effluent Pump Typical Application
Submersible Sump Pump Is Specifically Designed To Meet The Demands Of Residential Septic Tank Effluent Applications.
Power-Flo PFEH Series Effluent Pump Features
- DISCHARGE: 2” NPT, Female, Vertical
- LIQUID TEMPERATURE: 104°F Continuous
- MOTOR HOUSING/ VOLUTE: Cast Iron, Class 30
- SEAL PLATE: Cast Iron, Class 30
- IMPELLER: 2 Vane Open with Pump Out Vanes on Back Side, Dynamically Balanced, ISO G6.3, Bronze 85-5-5-5
- SHAFT & HARDWARE: Stainless steel
- SQUARE RINGS: Buna-N
- SEAL: Inboard, Single Mechanical, .625”, Type “C” U.S. Seal, Oil Filled Chamber, Silicon Carbide/Silicon Carbide/Buna-N with Secondary Exclusion Seal
- UPPER BEARING: Single Row, Ball, Oil Lubricated
- LOWER BEARING: Single Row, ball, Oil Lubricated
- POWER CORD: 15 FT., Pressure Grommet for Sealing & Strain Relief
- 1 PHASE: SJTOW, 14/3 Cord, .39” Dia.
- 3 PHASE: SOW, 12/4 Cord, .60” Dia
- MOTOR: Class B Insulation, Oil Filled, NEMA Design L-1 ph, B-3ph
- SINGLE PHASE: Permanent Split Capacitor (PSC), Includes Overload Protection in Motor
- THREE PHASE: Requires Overload Protection to be Included in Control Panel
- WARRANTY: 1 Year
Power-Flo PFEH1042 Specifications
- VOLTAGE: 3ø, 460V, 60Hz
- HORSEPOWER: 1.0 HP
- AMP DRAW (full load): 2.8
- MOTOR TYPE: NEMA Design L-1
- RPM: 3450
- MAXIMUM HEAD: 80'
- MAXIMUM CAPACITY: 80 GPM
- DISCHARGE PIPE SIZE: 2.0" FNPT
- MAXIMUM SOLIDS HANDLING SIZE: 0.75" Spherical Solids
- IMPELLER TYPE: Two-Vane Open With Pump Out Vanes on Back Side. Bronze 85-5-5-5
- IMPELLER DIAMETER: 4.63"
- CORD LENGTH: 15'
- CORD SIZE: 12/4; Type: SOW
- BODY CONSTRUCTION: Cast Iron, Class 30
- MAXIMUM LIQUID TEMPERATURE: 104°F Continuous
Power-Flo PFEH Series Effluent Pump Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov