Prev Next

Power-Flo PF4SCC4246 Cutter Pump 4.2 HP 460V 3PH 30' Cord Manual

Price: Call For Details
Quantity:
+ -
Usually ships within 3 weeks
SKU: PFPF4SCC4246


Shipping Weight:
460.0 LBS
Shipping Dimensions
Length: 14 In
Width: 15 In
Height: 25 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Temporarily Unavailable Do To Supply Chain Issues!

Power-Flo PF4SCC Series Submersible Cutter Pump Description

Severe duty submersible cutter pump designed for un-screened stringy, fiberous raw sewage applications.

Power-Flo PF4SCC Series Submersible Cutter Pump Application

Submersible Cutter Sewage Pump To Shear Large Solids In Waste Water Down To A Fine Slurry That Can Be Directed To A Central Sewer System.

Power-Flo PF4SCC Series Submersible Cutter Pump Features

  • DISCHARGE: 4” 125 lb., ANSI Flange, Horizontal
  • LIQUID TEMPERATURE: 104°F Continuous
  • MOTOR HOUSING, VOLUTE & SEAL PLATE: Cast Iron, Class 30
  • IMPELLER/CUTTER CONE: 2 Port, Enclosed, Cast Iron, Spiral Cutter Integral with Impeller, Hardened Steel 52/53 Rockwell “C”
  • CUTTER BLADE: Hardened Steel 45/47 Rockwell "C"
  • SHAFT: 420 Stainless Steel
  • HARDWARE: 300 series Stainless Steel
  • SQUARE RINGS: Buna-N
  • SEAL: Tandem mechanical, Oil Filled Reservoir, with Upper - Carbon/Stainless/Buna-N, & Lower - Tungsten Carbide/Tungsten Carbide/Buna-N
  • UPPER BEARING: Single Row, Ball, Grease Lubricated
  • LOWER BEARING: Double Row, Ball, Grease Lubricated
  • POWER CORD: 30 Ft., Pressure Grommet for Sealing
  • SENSOR CORD: 30 Ft. 4G1.5mm², 0.457” O.D., Cord
  • MOTOR: NEMA B, Air Filled, Class F Insulation, Includes Overload Protection, Dual voltage 230/460, 3 Phase
  • SEAL LEAK SENSOR: Normally Open (N/O), Requires Relay in Control Panel.
  • TEMPERATURE SENSOR: Normally Closed (N/C), Requires Relay in Control Panel
  • WARRANTY: 1 Year

Power-Flo PF4SCC4246 Specifications

  • VOLTAGE: 3ø, 460V, 60Hz
  • HORSEPOWER: 4.2 HP
  • AMP DRAW (full load): 6.4
  • MOTOR TYPE: NEMA B, Air Filled, Class F Insulation
  • RPM: 1150
  • MAXIMUM HEAD: 24'
  • MAXIMUM CAPACITY: 265 GPM
  • DISCHARGE PIPE SIZE: 4.0" 125 lb., ANSI Flange, Horizontal
  • IMPELLER TYPE: 2-Port, Enclosed, Cast Iron, Spiral Cutter
  • IMPELLER DIAMETER: 6.89"
  • CORD LENGTH: 30', Pressure Grommet for Sealing
  • BODY CONSTRUCTION: Cast Iron, Class 30
  • MAXIMUM LIQUID TEMPERATURE: 104°F Continuous

Power-Flo PF4SCC Series Submersible Cutter Pump Performance Curve

pf4scc-4236-4246-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Power-Flo Warranty

Sump/Effluent & Dewatering Pumps - 2 Years Limited Warranty

Manufacturer warrants, to the immediate purchaser and subsequent initial owner during the warranty period,every new pump to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of eighteen (18) months from date of manufacture or twelve (12) months from date of installation (which ever comes first). Failure due to wear due to excessive abrasives is not covered. The initial owner is the purchaser who first uses the pump after its initial installation, or for non-permanent installation,the first owner who uses the pump. The date of installation shall be determined by a dated sales receipt noting the model and serial number of the pump. The dated sales receipt must accompany the returned pump. Product will be repaired, replaced or re-manufactured at Manufacturer’s option. No allowance will be made for shipping charges,damages, labor or other charges that may occur due to product failure, repair or replacement. This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or act of God; that has not been installed, operated or maintained in accordance with Manufacturer’s installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement, mud, tar,hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products. Contact Manufacturer at: 1-877-24PUMPS or www.powerfl opumps.com, Attention: Customer Service Department, to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY. Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned