Prev Next

Sta-Rite 30DOM05221 ST.E.P. Plus D-Series High Head Submersible Effluent Pump 30 GPM 0.5 HP 230V 1PH 10' Cord

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: SRT30DOM05221


Shipping Weight:
27.0 LBS
Shipping Dimensions
Length: 24 In
Width: 6 In
Height: 6 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

sta-ritelogopumps3.jpg

Sta-Rite ST.E.P. Plus D Series Description

The ST.E.P. Plus™ D-Series 4" submersible pump series in 10, 20 and 30 GPM models dominates with superior "DRAW-DOWN" capability, with reduced amp draw and with cooler and quieter operation.

Sta-Rite ST.E.P. Plus D Series Applications

Clean and Gray Water for Residential, Commercial and Agricultural Use.

Sta-Rite ST.E.P. Plus D Series Features

  • Proven Stage System: The Proven SignaSeal Staging System Utilizes a Patented Ceramic Wear Surface. When Incorporated with Sta-Rite's "True" Independent Floating Impellers, Dominates with 1st-In-Class Performance, Superior Sand Handling and a Thrust Management Staging System with Industry Exlusive "Dry-Run" Capabilities.
  • Superior "Draw-Down" Capability: The ST.E.P. Plus Dominates in this Class with the Lowest Draw-Down of 4-1/2" (a standard 4" NEMA submersible only draws-down to 13-1/2").
  • Reduced Amp Draw: The ST.E.P. Plus Dominates in this Class with Less Energy Consumption - Over 25% Less Amp Draw (9.5 amps vs. 12.7 amps, 115 volt) than a 4" NEMA Submersible, Reducing Operating Costs and Extending the Service Life of Float Switch Contacts.
  • Cooler and Quieter Operation: The ST.E.P. Plus Dominates by using the Pumped Liquid to Cool the Motor as it Passes over the Motor. The Water Passing Over the Motor Dampens the Motor Noise, Eliminating Expensive "Flow-Inducer Sleeves" Required when Using a Standard 4" NEMA Submersible.
  • Impellers: Precision Molded for Perfect Balance....Ultra Smooth for the Highest Performance and Efficiency. Allows for .080" Solids.
  • Shaft: Positive Drive, Hexagonal 7/16" - 300-Grade Stainless Steel Shaft Offers Generous Impeller Drive Surfaces.
  • Shaft Bearing: Exclusive Self-Lubricating Nylatron Bearing Resists Surface Wear from Sand and Abrassives.
  • Shell: Corrosion Resistant 300-Grade Stainless Steel.

Sta-Rite ST.E.P. Plus D Series Specifications

  • VOLTAGE: 1ø, 230V, 60Hz
  • HORSEPOWER: 0.5 HP
  • AMP DRAW (full load): 4.6
  • MOTOR TYPE: Dry-Wound, Double Ball Bearing, Double Seal & Thermal Overload
  • MAXIMUM HEAD: 100'
  • MAXIMUM CAPACITY: 43 GPM
  • DISCHARGE PIP SIZE: 1-1/4" Fiberglass-Reinforced Thermoplastic
  • MAXIMUM SOLIDS HANDLING: .080"
  • IMPELLER TYPE: Acetal
  • CORD LENGTH: 10' Type SJOW
  • BODY CONSTRUCTION: Stainless Steel

Sta-Rite ST.E.P. Plus D Series Pump Curve

steppluscurve20plus.jpg

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Sta-Rite Limited Warranty

Sta-Rite Limited Warranty

STA-RITE warrants, to the original consumer of the products listed below, that they will be free from defects in material and workmanship for the Warranty Period from the date of original installation or manufacture as noted.

Product: Sump/Effluent/Sewage Products
Warranty Period: Whichever Occurs First: 12 Months from Date of Original Installation or 18 Months from Date of Manufacture.

Our warranty will not apply to any product that has been subject to negligence, misapplication, improper installation or maintenance. In the event a three-phase submersible motor is operated with single-phase power through a phase converter, or if three-leg ambient compensated, extra-quick trip overload relays of recommended size are not used, or warranty is void. Buyer's only remedy and Sta-Rite's only duty is to repair or replace defective products (at Sta-Rite's choice). Buyer agrees to pay all labor and shipping charges associated with this warranty and to request warranty service through the installing dealer as soon as a problem is discovered. If warranty service is requested more than 30 days after the Warranty Period has ended, it will not be honored.

STA-RITE SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BEYOND THE WARRANTY PERIOD PROVIDED HEREIN.

Certain states do not permit the exclusion of limitation of incidental or consequential damages or the placing of limitations on the duration of an implied warranty, therefore the limitations or exclusions herein may not apply. This warranty sets forth specific legal rights and obligations, however, additional rights may exist, which may vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned