THE STA-RITE HT3 SERIES HAS BEEN DISCONTINUED BY THE MANUFACTURER. PLEASE
CLICK ON THE LINK BELOW FOR THE RECOMMENDED REPLACEMENT
(similar pump but under a different brand)
Sta-Rite HT/HTX Series Description
The HT3/HTX3 Series pump is a small, rugged, submersible, cast iron pump
with a non-clog vortex impeller, solids handling capability to 3/4", and
the ability to handle high temperature discharge effluent
Sta-Rite HT/HTX Series Specifications
- BODY CONSTRUCTION: Cast Iron
- HORSEPOWER: 1/3 HP
- MAXIMUM HEAD: Up to 22'
- FLOW AT 10' LIFT: 45 GPM
- SWITCH TYPE: Teathered
- MOTOR: 1/3 HP, 1550 RMP, Oil-filled. Built-in thermal overload
protection with auto reset
- SHAFT SEAL: Type 6A or equal, Bunea-N elastomers, carbon andceramic
sealing faces, stainless steel metal parts
- BEARINGS: Lower ball and upper sleeve type, oil lubricated
- IMPELLER: Cast iron
- DISCHARGE SIZE: 1-1/2" FNPT
- MAXIMUM SOLIDS HANDLING SIZE: 3/4"
- AMP DRAW: 13 full load amps
- POWER CORD: 20'
- VOLTAGE: 115 VOLT, 1PH, 60 Hz
- MAXIMUM LIQUID TEMPERATURE: HT - 194 degrees F, HTX - 200 degrees F
Sta-Rite HT/HTX Series Pump Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov