THE STA-RITE HTX3 SERIES HAS BEEN DISCONTINUED BY THE MANUFACTURER. PLEASE CLICK ON THE LINK BELOW FOR THE RECOMMENDED REPLACEMENT

MYERS S40HT CLICK HERE

(similiar pump but under a different brand)

Sta-Rite HT/HTX Series Description

The HT3/HTX3 Series pump is a small, rugged, submersible, cast iron pump with a non-clog vortex impeller, solids handling capability to 3/4", and the ability to handle high temperature discharge effluent

Sta-Rite HT/HTX Series Specifications

• BODY CONSTRUCTION: Cast Iron
• HORSEPOWER: 1/3 HP
• MAXIMUM HEAD: Up to 22'
• FLOW AT 10' LIFT: 45 GPM
• SWITCH TYPE: No control switch included
• MOTOR: 1/3 HP, 1550 RMP, Oil-filled. Built-in thermal overload protection with auto reset
• SHAFT SEAL: Type 6A or equal, Bunea-N elastomers, carbon andceramic sealing faces, stainless steel metal parts
• BEARINGS: Lower ball and upper sleeve type, oil lubricated
• IMPELLER: Cast iron
• DISCHARGE SIZE: 1-1/2" FNPT
• MAXIMUM SOLIDS HANDLING SIZE: 3/4"
• AMP DRAW: 13 full load amps
• POWER CORD: 20'
• VOLTAGE: 115 VOLT, 1PH, 60 Hz
• MAXIMUM LIQUID TEMPERATURE: HT - 194 degrees F, HTX - 200 degrees F

Sta-Rite HT/HTX Series Pump Curve

Sta-Rite HT/HTX Series Product Resources

Download Sta-Rite HT/HTX Series Specification

Download Sta-Rite HT/HTX Series Manual

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov