Prev Next

Littelfuse RM2000CBM+ Remote Monitor

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: MSRRM2000CBM+


Shipping Weight:
2.0 LBS
Shipping Dimensions
Length: 12 In
Width: 10 In
Height: 10 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Discontinued

Littelfuse RM-2000CBM+ Remote Monitor Description

The RM2000 Series is a motor-monitoring device to be used in conjunction with the 777 family of products (excluding the P1 Series), 77C family of products and the Model 601 voltage monitors, via Modbus protocol with a communications module. The RM2000/777 motor management system combines unsurpassed electronic motor protection and critical, userfriendly, motor monitoring.

The RM2000 has membrane keypad controls which allow both monitoring and control of a 777 MotorSaver® through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 RM2000 devices from a PLC, DCS, or SCADA system or a PC with Solutions software installed. The RM2000 will act as a repeater for its motor protector when accessed from the host computer or PLC. In addition to the monitoring functions, the RM2000 can be used to reset a tripped MotorSaver® or PumpSaver®.

The RM2000 is easily mounted remotely and improves safety for service and operations personnel by allowing them to control and monitor the device without opening the electrical cabinet. Using the RM2000 is a simple, cost-effective method for aiding compliance with arc flash safety regulations. The enclosure and keypad assembly is water and ultraviolet light resistant.

Littelfuse RM-2000CBM+ Remote Monitor Features:

  • Displays:
    • Average Current, Individual Line Currents and Current Unbalance
    • Current to Ground (Ground Fault Current)
    • Line-to-Line Voltages, Average Voltage and Voltage Unbalance
    • Instantaneous Power (Kw)
    • Power Factor
    • Last Four Faults
    • All Parameters Programmed into 777 MotoSaver®
    • Remaining Restart Delay Times
  • Controls:
    • Start and Stop Buttons
    • Key Lock Input to Prevent Setpoint Changes
    • Change 777 Setpoints from Keypad
  • The RM20000 is also Equipped with a Real-Time Clock, which Allows Access to the Following Motor Management Information (most readings can be reset):
    • Total Motor Run-Time
    • Time and Date of Last Four Faults, along with Voltage and Current at Time of Trip
    • Time and Date of Last 10 Motor Starts
    • Total Number of Motor Restarts
    • Minimum Time Between any Two Starts with Time and Date
    • Run-Time Since Last Start
    • kWh Consumed
    • kVARs Consumed

Littelfuse RM-2000CBM+ Remote Monitor Specifications

Control Voltage . . . . . 115VAC ±10%; 50/60Hz

Transient Protection (Internal) . . . . . 2500V for 10ms

Real Time Clock

  • Battery Back-Up Life . . . . . . . . 10 years @ 25°C without external power
  • Last Fault Memory. . . . . . . . . . Stores up to 4 faults with time and date stamp includes voltages and currents at time of trip
  • Configuration . . . . . . .Two independent electro-mechanical Form C (SPDT)
  • Contact Material . . . . . . . Silver/Tin Oxide

Output Characterstics

  • . . . . . . . . . . . . . . . . . . . . . . . 240VA @ 120VAC Pilot Duty
  • . . . . . . . . . . . . . . . . . . . . . . . .5A @ 120VAC General Purpose

Ambient Temperature Range

  • Operating . . . . . . . . . . . . . . . . . . . . .-20° to 70°C (-4° to 158°F)
  • Storage . . . . . . . . . . . . . . . . . . . . .-30° to 70°C (-22° to 158°F)

Maximum Input Power . . . . . . . . . 3 W

Class of Protection . . . . . . . . . . . . . . . NEMA 3R and/or UL Type 12

Relative Humidity . . . . . . . . . . . . . . . . . . . . . Up to 85%, non-condensing

Safety Marks

  • UL . . . . . . . . . . . . . . . . . . . . .UL508 (File #E68520)
  • CSA . . . . . . . . . . . . . . . . . . . . C22.2 No. 14 (File #46510)
  • CE . . . . . . . . . . . . . . . . . . . . IEC 60947-6-2

Enclosure

  • Material . . . . . . . . . . . . . . . . . . . Black polycarbonate
  • Diplay . . . . . . . . . . . . . . . . . . . . Liquid crystal with extended temp. range
  • Size . . . . . . . . . . . . . . . . . . . . 2 rows x 20 characters
  • Lighting . . . . . . . . . . . . . . . . . . . . LED Backlight
  • Keypad . . . . . . . . . . . . . . . . . . . . Eight 0.5” stainless steel dome buttons for tactile feedback

Mechanical Life . . . . . . . . . . . . . . . . . 100,000 actuations

Overlay Material. . . . . . . . . . . . . . . . Polyester

UV Exposure w/o Degradation . . . . . . . . . . . . . . .2000 hrs

Terminal Torque . . . . . . . . . . . . . . . 3 in.-lbs

Weight . . . . . . . . . . . . . . . 19.2oz

Mounting Method . . . . . . . . . . . . .Surface mountable on backplane using


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SymCom Warranty

SymCom Limited Warranty

Terms and Conditions of Sale

Effective January 1, 2009 General Remarks: These Terms and Conditions of Sale apply to all sales and deliveries effected by SymCom. Any terms or conditions on the part of the purchaser that are contrary to these shall not be binding on SymCom, even if they form the basis of the order. Prices: Subject to change without notice. Minimum order is one hundred-fifty dollars ($150.00), excluding shipping charges. Terms: Net 30 days from ship date with approved credit. New customers requesting trade credit must submit a credit application prior, and receive approval prior to an order being placed in production. Handling Fee: A $5.00 handling fee will be assessed on each order. Delivery: Buyer's delivery schedule will be met to the best of SymCom's ability. SymCom reserves the right to make partial shipments on any order. SymCom is not responsible for shipping errors on behalf of the carrier. Freight: All sales are F.O.B., SymCom, Inc., Rapid City, SD. Shipments will be made by the transportation method selected by the Buyer whenever practical. Warranty: SymCom warrants its standard products against defects in material or workmanship for a period of five (5) years from the date of manufacture. All third-party products are warranted by their manufacturer and are handled as a pass-through warranty by SymCom. All custom and private labeled products are warranted for eighteen (18) months unless otherwise stated in writing. The liability of SymCom is limited, at its option, to replace, repair, or credit at the purchase price, for any devices which are returned during the warranty period and which prove to be defective. This warranty constitutes SymCom's sole liability here under and is in lieu of any other warranty expressed, implied or statutory, written or oral, including without limitation, any implied warranties of merchantability or fitness for a particular purpose and supersedes any representations made by any person which are inconsistent with or expand the terms set forth in this document. No person is authorized to modify this warranty in any way whatsoever. Limits of Liability: IN NO EVENT, REGARDLESS OF CAUSE, SHALL SYMCOM BE LIABLE FOR (1) PENALTIES OR PENALTY CAUSES OF ANY DESCRIPTION OR (2) FOR CERTIFICATION NOT OTHERWISE SPECIFICALLY PROVIDED HEREIN AND/OR INDEMNIFICATION OF BUYER TO OTHERS FOR COSTS, DAMAGES OR EXPENSES, EACH ARISING OUT OF OR RELATED TO THE PRODUCT OR SERVICES OF ANY ORDER OR (3) FOR ANY DAMAGES, WHETHER GENERAL, SPECIAL, OR FOR NEGLIGENCE, AND EXPRESSLY EXCLUDES DAMAGES RESULTING FROM LOSS OF PROFITS, USE OF PRODUCTS, ANY INCIDENTAL, OR INDIRECT CONSEQUENTIAL DAMAGES EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SYMCOM'S OBLIGATION TO REPAIR, REPLACE OR CREDIT THE PURCHASE PRICE SHALL BE THE LIMIT OF ITS LIABILITY UNDER THIS WARRANTY. Returns: All returns must be authorized by SymCom and must have a Return Material Authorization (RMA) number. Issuance of a RMA number does not acknowledge goods as defective or under warranty by the seller. Unauthorized returns will be refused. Authorized returns must be shipped freight prepaid and are subject to inspection and/or testing prior to disposition. Product built to Buyer's specifications cannot be returned for credit or exchanged under any circumstances. For SymCom’s complete RMA terms, please visit our website. Cancellation of Custom or Non-Preferred Products: Buyer may cancel an order upon written notice to SymCom's customer service department and upon payment of cancellation charges, which shall include all costs, both direct and indirect, incurred and/or committed. SymCom agrees to divert completed work and work in progress from a cancelled order to other orders whenever possible. Cancellation of Preferred Products: Full refund if returned within 30 days of purchase. Unit must be in original packaging and in new condition. An RMA must be issued for any return.

We've been helping customers since 1953

Trust Guard Security Scanned