Prev Next

Zoeller 807-0001 Model M807 "Shark" Fractional HP Grinder Pump 1.0 HP 115V 1PH 15' Cord Automatic

Price: $1,308.00
Quantity:
+ -
Usually ships within 3 weeks
SKU: ZLR807-0001


Shipping Weight:
75.0 LBS
Shipping Dimensions
Length: 12 In
Width: 10 In
Height: 18 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

zoeller-logo.jpg

Zoeller Model M807 Grinder Pump Description

Our Model M807 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump. The M807 is a fully automatic float-operated sewage pump. The white polypropylene float is solid so it cannot become waterlogged. This ensures that it is always buoyant and able to turn the pump on when necessary.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″. The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 807’s switch case, motor housing, pump housing, and base are each constructed of cast iron. The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.

Zoeller Model M807 Grinder Pump Features and Benefits

  • 803 - ½ HP, 805 - ¾ HP, 807 - 1 HP
  • Performance up to 55' (16.8 m)
  • 115/230V Grinders for Residential use Without Commercial Grinder Costs
  • Oil Filled for Optimal Heat Dissipation
  • Proven Tri-Slice® Cutter Technology - Three Independent Cutting Channels Provide Over 250,000 Cuts Per Minute.
  • Stainless Steel Cutter and Plate
  • Automatic and Nonautomatic Available
  • 100% Factory Tested

Zoeller 807-0001 Grinder Pump Specifications

  • VOLTAGE: 1ø, 115V, 60Hz
  • HORSEPOWER: 1.0 HP
  • AMP DRAW (full load): 11.0
  • MOTOR TYPE: Capacitor Start, Capacitor Run
  • RPM: 3400
  • MAXIMUM HEAD: 55'
  • MAXIMUM CAPACITY: 45 GPM
  • SWITCH TYPE: Vertical Float Switch
  • SWITCH 'ON' LEVEL: 13"
  • SWITCH 'OFF' LEVEL: 5-3/4"
  • DISCHARGE PIPE SIZE: 1-1/4" NPT
  • IMPELLER TYPE: Engineered Plastic, Non-Clogging Vortex
  • CORD LENGTH: 15' Type UL Listed 3-Wire Plug
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM LIQUID TEMPERATURE: 130°F (54C)

Zoeller Model M807 Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Zoeller Limited Warranty

Manufacturer warrants, to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of three years from the date of purchase. Proof of purchase is required. Parts that fail within the warranty period, that inspections determine to be defective in material or workmanship, will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or act of nature; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Service Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned