Prev Next

Zoeller 842-0004 Model E842 "Shark" Single Directional Grinder Pump 2 HP 230V 1PH 20' Cord Nonautomatic

Price: $3,304.00
Quantity:
+ -
Usually ships within 3 weeks
SKU: ZLR842-0004


Shipping Weight:
149.0 LBS
Shipping Dimensions
Length: 12 In
Width: 12 In
Height: 25 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

zoeller-logo.jpg

Zoeller Model E842 Grinder Pump Description

The Shark® series of submersible grinder pumps is designed for use in residential or commercial wastewater applications and can be used to transfer raw sewage. Each pump features an innovative cutting mechanism, allowing it to grind solids into fine particles. When used in conjunction with a properly equipped control panel, the Model 840 utilizes an automatic reversing cutter, which doubles the service life of a single-direction grinder and prevents clogging. The uniform consistency of the discharged material reduces the risk of clogs in the pipe, yielding less down time and fewer service calls. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion, and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller® pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.

Zoeller Model E842 Grinder Pump Features and Benefits

  • Finned, Class 30 Cast Iron Construction
  • Corrosion-Resistant, Powder Coated Epoxy Finish
  • 1-1/4" NPT Discharge
  • Hardened Stainless Steel Cutter and Disc, Rockwell C55-60
  • Cutters Protected from Abrasive Solids
  • Bronze Vortex Impeller
  • Stainless Steel Screws, Bolts and Lifting Bail
  • Easily Adapts to Many Existing Competitors’ Rail Systems
  • Dual Mechanical Seals with Leak Detection
  • Automatic Thermal Overload Protection
  • Legs Provide for Free Standing Installation
  • Pre-Assembled Systems Available

Zoeller 842-0004 Grinder Pump Specifications

  • VOLTAGE: 1ø, 230V, 60Hz
  • HORSEPOWER: 2.0 HP
  • AMP DRAW (full load): 17.2
  • MOTOR TYPE: Capacitor Start / Capacitor Run
  • RPM: 3450
  • MAXIMUM HEAD: 125'
  • MAXIMUM CAPACITY: 35 GPM
  • SWITCH TYPE: Manual
  • DISCHARGE PIPE SIZE: 1-1/4" NPT Vertical
  • IMPELLER TYPE: Ductile Iron, Non-Clogging Vortex
  • CORD LENGTH: 20' Type SOW or SOOW Multi-Wire Neoprene
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM LIQUID TEMPERATURE: 130°F (54C)

Zoeller Model E842 Performance Curve

841.842-performance-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Zoeller Limited Warranty

Manufacturer warrants, to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of one year from date of purchase by the end user, or 18 months from date of original manufacture of the product, whichever comes first. Parts that fail within the warranty period, one year from date of purchase by the end user, or 18 months from the date of original manufacture of the product, whichever comes first, that inspections determine to be defective in material or workmanship, will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or act of God; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Service Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned