Prev Next

Barmesa BMVF16-60-1503 Vertical Multi-Stage Centrifugal Pump 15 HP 3PH

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: BMSBMVF16-60-1503


Shipping Weight:
331.0 LBS
Shipping Dimensions
Length: 11 In
Width: 11 In
Height: 47 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Discontinued

Barmesa Vertical Multi-Stage Centrifugal Pump

BMV pump is driven by a standard electric motor. The motor output shaft directly connects with the pump shaft through a coupling. The pressure-resistant cylinder and flow passage components are fixed between pump head and inlet and outlet section with stay bolts. The inlet and outlet are located at the pump bottom at the same plane. This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running, out-of-phase and overload.

Barmesa Vertical Multi-Stage Centrifugal Pump Applications

  • Boiler Water Supply and Condensing System.
  • Water Treatment, Filtration System.
  • Food and Beverage Industries.
  • Pressure Boosting in High-Rise Buildings.
  • Farmland Irrigation, Nursery Irrigation and Golf Court Irrigation.
  • Industry Cleaning System.
  • Liquid Transfer, Circulation and Boosting.
  • Hot and Cool Water.

Barmesa Vertical Multi-Stage Centrifugal Pump Features

  • Cast Iron Base & Flanges
  • All Other Wetted Parts in Stainless Steel
  • High Efficiency
  • Low Noise
  • Compact Design
  • Easy to Service
  • Cartridge Type Seal

Barmesa BMVF16-60-1503 Specifications

  • DISCHARGE SIZE: 2.0"
  • INLET SIZE: 2.0"
  • MAXIMUM CAPACITY: 115 GPM
  • MAXIMUM HEAD: 400'
  • BODY CONSTRUCTION: Cast Iron
  • HORSEPOWER: 15 HP
  • MOTOR TYPE: TEFC (Totally Enclosed, Fan-Cooled, Standard Efficiency)
  • VOLTAGE: 3ø, 230/460V
  • STAGES: 6 / RPM: 3500
  • MAXIMUM LIQUID TEMPERATURE: 248°F

Barmesa Vertical Multi-Stage Centrifugal Pump Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

BARMESA PUMPS FACTORY WARRANTY


Barmesa Pumps warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for 18 months from date of manufacture or 12 months from installation date whichever occurs first. This warranty gives you specific legal rights,which vary from state to state.

This warranty is a limited warranty, and no warranty related claims of any nature whatsoever shall be made against Barmesa Pumps, until the ultimate consumer or his/her successor notifies us inwriting of the defect and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station as instructed by Barmesa Pumps. THERE SHALL BE NO FURTHER LIABILITY. WHETHER BASED ON WARRANTY. NEGLIGENCE OR OTHERWISE. PRODUCT SHALL BE EITHER REPLACED OR REPAIRED AT THE ELECTION OF BARMESA PUMPS. Guarantees relating to performance specifications provided in addition to the foregoing material and workmanship warranties on a product manufactured by Barmesa Pumps, if any, are subject to possible factory testing. Any additional guarantees, in the nature of certified performance specifications or time frame must be inwriting and such writing must be signed byour authorized factory manager at time of order placement and/or at time of quotation. Due to inaccuracies in field testing and should a conflict arises between the results of field testing conducted by or for the user, Barmesa Pumps reserves the right to have the product returned to our factory for additional testing.

This warranty shall not apply when damage is caused by (1) improper installation, (2) improper voltage, (3) lightning, (4) excessive sand or other abrasive material, (5) corrosion build-up due to excessive chemical content or (6) uncontrollable acts of god. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective pumps, parts or systems. Barmesa Pumps will not accept charges incurred by others without our prior written approval.

This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval.

IMPORTANT!

If you have a claim under the provision of the warranty, contact Barmesa Pumps or your authorized Barmesa Pumps Distributor:

warranty@barmesapumps.com

www.barmesapumps .com

We've been helping customers since 1953

Trust Guard Security Scanned