Prev Next

Barmesa SW Series 8SWL7546DS Submersible Solids Handling Pump 7.5 HP 460V 3PH 40' Cord Manual

Price: $18,796.50
Quantity:
+ -
Usually ships within 2 days
SKU: BMS8SWL7546DS


Shipping Weight:
0.0 LBS
Shipping Dimensions
Length: 22 In
Width: 27 In
Height: 55 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Barmesa SW Series Submersible Solids Handling Pump Description

The New Barmesa State of the Art SW Pump offers durability and premium energy efficiency, making it a more sustainable product for the end user. Our engineers designed the SW Series to handle the most demanding applications with trouble-free operation. The SW series offers, superior cooling capabilities, continuous lubrication, motor moisture protection, and the highest efficient motor available.

Barmesa SW Series Submersible Solids Handling Pump Features

  • MOTOR: NEMA, Three Phase, Premium Efficiency, Oil-Filled, Squirrel Cage Induction, Inverted Duty Rated. Class H Insulation. Requires Overload Protection in Control Panel.
  • MOTOR HOUSING: Cast Iron ASTM A-48 Class 30
  • BEARINGS: Upper - Single Row and Oil Lubricated for Radial Load. Lower - Double Row and Oil Lubricated, for Radial and Thrust Loads.
  • SEAL DESIGN: Tandem, Mechanical, in Oil Filled Reservoir
  • SEAL MATERIAL: Inboard Rotating Faces - Carbon; Stationary Faces - Ceramic. Outboard Rotating and Stationary Faces, Silicone Carbide. Buna-N Elastomer and 300 Series Stainless Steel Hardware.
  • IMPELLER: Enclosed Dual Vane with Pumpout Vanes on Backside, Dynamically Balanced. Ductile Iron ASTM A-536, 65-45-12.
  • DISCHARGE: 8", 125lb, Horizontal Flange, Slotted to Accommodate 150 mm ISO Flange.
  • TEMPERATURE RATING: 104°F (40°C) Continuous

Barmesa 8SWL7546DS Pump Specifications

  • VOLTAGE: 3ø, 460V, 60Hz
  • HORSEPOWER: 7.5 HP
  • AMP DRAW (full load): 10
  • MOTOR TYPE: NEMA Three Phase Premium Efficiency
  • RPM: 1150
  • MAXIMUM HEAD: 34'
  • MAXIMUM CAPACITY: 1760 GPM
  • SWITCH TYPE: Manual
  • DISCHARGE PIPE SIZE: 8.0" 125lb, Horizontal Flange
  • MAXIMUM SOLIDS HANDLING: 3.5" Spherical Solids
  • IMPELLER TYPE: Ductile Iron, Enclosed Dual Vane with Pumpout Vanes on Back Side
  • IMPELLER DIAMETER: 9.10" Standard
  • CORD LENGTH: 40'
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM LIQUID TEMPERATURE: 104°F (40°C)

Barmesa SW Series Submersible Solids Handling Pump Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Barmesa SW Series Submersible Solids Handling Pump Product Resources

product-resourcesb.png

Download Barmesa 8SWL-DS Series Pump Catalog Sheet

Download Barmesa SW Series Pump Brochure

BARMESA PUMPS FACTORY WARRANTY


Barmesa Pumps warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for 18 months from date of manufacture or 12 months from installation date whichever occurs first. This warranty gives you specific legal rights,which vary from state to state.

This warranty is a limited warranty, and no warranty related claims of any nature whatsoever shall be made against Barmesa Pumps, until the ultimate consumer or his/her successor notifies us inwriting of the defect and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station as instructed by Barmesa Pumps. THERE SHALL BE NO FURTHER LIABILITY. WHETHER BASED ON WARRANTY. NEGLIGENCE OR OTHERWISE. PRODUCT SHALL BE EITHER REPLACED OR REPAIRED AT THE ELECTION OF BARMESA PUMPS. Guarantees relating to performance specifications provided in addition to the foregoing material and workmanship warranties on a product manufactured by Barmesa Pumps, if any, are subject to possible factory testing. Any additional guarantees, in the nature of certified performance specifications or time frame must be inwriting and such writing must be signed byour authorized factory manager at time of order placement and/or at time of quotation. Due to inaccuracies in field testing and should a conflict arises between the results of field testing conducted by or for the user, Barmesa Pumps reserves the right to have the product returned to our factory for additional testing.

This warranty shall not apply when damage is caused by (1) improper installation, (2) improper voltage, (3) lightning, (4) excessive sand or other abrasive material, (5) corrosion build-up due to excessive chemical content or (6) uncontrollable acts of god. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective pumps, parts or systems. Barmesa Pumps will not accept charges incurred by others without our prior written approval.

This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval.

IMPORTANT!

If you have a claim under the provision of the warranty, contact Barmesa Pumps or your authorized Barmesa Pumps Distributor:

warranty@barmesapumps.com

www.barmesapumps .com

We've been helping customers since 1953

Trust Guard Security Scanned