Deming Vertical Sump Pump Product Description
Deming Vertical Sump Pumps have been designed to fill the demand for a reliable, yet inexpensive unit, where a big industrial sump pump is larger than needed and a cellar drainer is too small.
Flexible coupling connects motor shaft and pump shaft. Pump shaft is ground and polished and is supported by a heavy duty, ball thrust bearing enclosed in a dust and water tight housing above the support plate. Impeller is semi-open.
Type A is furnished complete with discharge pipe extending through a split cover plate.
Type B is furnished without cover plate and without discharge pipe, so that the unit can be placed on the floor of the pit.
Type B can be easily converted to Type A by removing the base ring and adding the split cover plate and discharge piping. 20" or 28" cast iron split cover plate is made in halves and bolted together to fit bell of an 18" or 24" tile. Motor furnished are for 115/230 Volts single phase or 230/460 Volts, 3 phase, 60 cycle, 1750 RPM, as required.
A float switch, furnished as regular equipment, will automatically start and stop unit. An overload relay is provided in drip proof single phase motors through 1HP only. Protection for other motors must be provided by magnetic across-the-line starter. Furnished for sump depths up to 10' only.
Duplex assemblies include two standard Type A pumps with 40" diameter pit cover, manhole and single alternator float control.
Deming Vertical Sump Pump Typical Application
- Elevator Pits
 
- Basements
 
- Sump Drainage
 
- Flood Control
 
- Storm Water
 
- Industrial Process
 
- Condensation Control
 
- Power Plants
 
- General Dewatering Service
 
Deming Vertical Sump Pump Features
- Always Primed Submerged in Liquid Being Pumped.
 
- Compact Simplex or Duplex Design.
 
- Leak-Proof No Gland or Mechanical Seal in Liquid Contact.
 
- Adjustable Impeller
 
- Vented or Vapor Tight Construction
 
- Extensions for Pit Depths from 2 to 20 feet
 
- Utilize Standard C-Face Motors
 
- High Temperature Applications