1 1

Hymax Grip 791-56-12322-16 ND 12" MJ Cut-In Sleeve

Hymax Grip 791-56-12322-16 ND 12" MJ Cut-In Sleeve

Usually ships within 1 week

SKU : HMX791-56-12322-16

In Stock Quantity:0

:
Brand : Hymax
$1,666.81 USD
Shipping calculated at checkout.

Description

HYMAX Grip MJ Cut-in Sleeve (3″-12″) is a unique restraint coupling designed to connect valves and hydrants or existing lines with a mechanical joint connection.

Made from ductile iron, the HYMAX GRIP Cut-in Sleeve is the first transition coupling that can connect to a mechanical joint while restraining the connecting plain pipe with only one bolt to tighten.

  • The GRIP Cut-In Sleeve's Patented Radial Closing Mechanism Holds Pipe Tightly in Place During Installation, Allowing Full Control over the Gap Pipes.
  • As the Pipe Applies Axial Pressure, the GRIP Chain Increasingly Tightens over the Pipe, Preventing Pullout.
  • The HYMAX GRIP Technology Allows the Connecting Plain-End Pipe to be Slid and Adjusted as Needed, Saving Time on Cutting and Installing Extra Pipe.
  • The Reduced Number of Bolts and Lightweight Design of the HYMAX GRIP Cut-In Sleeve make Repairs Safer and Faster with Less Time Spent in the Ditch.
  • The HYMAX GRIP Cut-In Sleeve Allows Dynamic Deflection of the Pipe for up to Four Degrees Per Side, Reducing Future Pipe Cracks and Breaks.

Hymax Grip MJ Cut-In Sleeve Features

  • 791-56-12322-16; 12" MJ Cut-In Sleeve
  • The First One-Piece Transition Coupling that can Connect to a Mechanical Joint While Restraining the Connecting Plain Pipe-Saving Time on Cutting and Installing Extra Pipe
  • Wide Range - Replaces the Need to use Dedicated-Sized Transition Couplings to Help Reduce Inventory Costs and Save Shelf-Space
  • Lightweight, Only 1 Bolt to Tighten - For Faster and Safer Installation
  • Patented Grip Chain Offers Circular Restraint Around the Pipe
  • Patented Radial Closing Mechanism Holds Pipes Tightly in Place During Installation
  • Allows Dynamic Deflection of the Pipe for up to 4°, Reducing Futur Pipe Cracks and Breaks

Specifications

Hymax Grip MJ Cut-In Sleeve Specifications

  • Meets or Exceeds Standards AWWA C-219, NSF 61, NSF 372
  • SIZE: 12" Nominal Diameter Pipe Size
  • PIPE O.D. RANGE: 12.68 - 13.39
  • WORKING TEMPERATURE: EPDM -20°F up to +125°F
  • WORKING PRESSURE: 155 PSI
  • RATED PRESSURE: 232 PSI
  • TORQUE: 200 FT-LBS
  • MATERIALS:
    • END RINGS: Ductile Iron Casting ASTM A536 Grade 65-45-12
    • CENTER RING: Ductile Iron Casting ASTM A536 Grade 65-45-12
      MJ Adaptor Compatible with ANSI/AWWA C1111/A21.11-12
    • GASKETS: EPDM for Water and Sewage, Meets International Standards for Contact with Drinking Water
    • GRIP CHAIN: AISI 420
    • BRIDGE: AISI 304 Stainless Steel
    • SPHERICAL SPACERS: AISI 304 Stainless Steel
    • COATING: 100% Fusion Bonded Epoxy for Enhanced Corrosion Protection. Nominal Thickness 14 MIL.
    • NUTS, BOLTS AND WASHERS: AISI 304 Stainless Steel. Rolled Thread and Anti-Galling Coating


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Resources

Hymax Grip MJ Cut-In Sleeve Product Resources

product-resourcesb.png

Download HYMAX Grip Family Brochure

Download HYMAX Grip MJ Cut-In Sleeve Specifications

Download HYMAX Grip MJ Cut-In Sleeve Installation Instructions

Warranty
Loading...
View full details

PUMPS, WATER & WASTE WATER TREATMENT AND A WHOLE LOT MORE

Dedicated to deliver the highest quality products, and services in the water and wastewater industry, and with the help of our well-trained staff, provide a lasting value to each customer we support... read more

HELPING CUSTOMERS SINCE 1953

As time-tested specialists in water and waste water pumping systems, we are your best choice for pumps and related equipment.

  • Wastewater Treatment Systems
  • Sump Pump Systems
  • UV Water Purification & Treatment
  • Irrigation Pump Systems
  • Storm Water Lift Stations
  • Water Well Pump Systems

OUR CUSTOMERS REVIEWS