Prev Next

Pentek P43B0005A2-C XE Series 4" Submersible Motor 0.5 HP 230V 3-Wire 1PH

Price: Sold
Retail: $243.33
+ -
Usually ships within 2 weeks
SKU: BCPTKP43B0005A201C


Shipping Weight:
19.0 LBS
Shipping Dimensions
Length: 10 In
Width: 3 In
Height: 4 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

myerslogopumps1.png

Sold

Pentek XE Series 4" Submersible Motor Description

The Pentek XE Series 4" Submersible High-Thrust Motors are built with the latest design, manufacturing and testing technology. They feature laser-welded 304L stainless steel construction, higher thrust capacities and higher efficiencies. The Pentek XE Series submersible motors incorporate "encapsulated, epoxy stator design," and proffesional-grade Class F insulation provides longer life in harsh environments. Each motor is 100% factory pressure and run tested to support our quality standards.

Pentek XE Series 4" Submersible Motor Key Features

  • Oversized Kingsbury-Type Thrust Bearing Design-Large High-Performance Bearings are Standard on all HPs Alowing for Higher Thrust Loads, Providing Many Years of Trouble-Free Service under Severe-Duty Operation.
  • 3-Wire Motors Operate with Pentek SMC-CR, VIP Pro and Pentek Intellidrive™ Products
  • All Stainless Steel Exterior
  • Professional-Grade Class F-Compliant Motor Insulation-Allows for Longer Service Life.
  • Automatic Thermal Protection
  • All 115V and 230V Motors are Equipped with Surge Arrestors to Provide Maximum Protection against Lightning, Transient and Voltage Surge Conditions.

Pentek XE Series 4" Submersible Motor Specifications

  • HERTZ: 60 Hz
  • HORSE POWER: 0.5 HP
  • VOLTAGE: 230 V
  • PHASE: 1 PH
  • SERVICE FACTOR: 1.6
  • FULL LOAD AMPS (YBR): 5.5/5.5/0
  • MAX WATER TEMP: 86°F/30°C
  • LENGTH (inches): 10"
  • SHELL: 304L Stainless Steel, Laser Welded to End Bells
  • MOTOR SHAFT: 17-4 Precipitation Hardened SS
  • INSULATION: Class F, 311°F (155°C)
  • FASTNERS: 304-Grade Stainless Steel
  • LIP SEAL: Nitrile
  • SAND BOOT: Nitrile
  • CABLE: Field-Serviceable, Controlled Compression Design UL, CSA, NSF Approved
  • CABLE LENGTH: 48"
  • DIAPHRAM: EPDM
  • THRUST BEARINGS: Kingsbury-Type, Pivot Show, Carbon Graphite Mating Ring
  • THRUST LOAD CAPACITY: 700


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MYERS LIMITED WARRANTY

Myers® warrants to the original consumer purchaser (“Purchaser” or “You”) of the products listed below, that they will be free from defects in material and workmanship for the Warranty Period shown below

ProductWarranty Period whichever occurs first:
Jet pumps, small centrifugal pumps, submersible pumps and related
accessories
12 months from date of original installation, or 18 months from date of manufacture
Fibrewound Tanks5 years from date of original installation
Fibrewound Tanks5 years from date of original installation
Sump/Sewage/Effluent Products12 months from date of original installation, or 36 months from date of manufacture
Battery Backup Units
MBSP-2, MBSP-2C
MBSP-3, MBSP-3C
12 months from date of original installation, or 18 months from date of manufacture
24 months from date of original installation, or 30 months from date of manufacture
Wastewater Solids Handling Pumps12 months from date of shipment from factory or 18 months from date of manufacture

Our warranty applies only where such products are used in compliance with the requirements of the applicable product catalog and/or manuals. For additional information, please refer to the applicable standard limited warranty featured in the product manual.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and MYERS’s only duty, is that MYERS repair or replace defective products (at MYERS’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

MYERS SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING LIMITED WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This Limited Warranty is effective April 1, 2014 and replaces all undated warranties and warranties dated before April 1, 2014.

We've been helping customers since 1953

Trust Guard Security Scanned