Pump Switch has never been used, however has an older manufacturer date.
Minimum 30 Day Warranty from Day of Receipt.
Mercury activated, wide-angle switch designed to control pumps up to 1 HP
at 120 VAC and 2 HP at 230 VAC. This switch controls pumps in nonpotable water and sewage
applications. It is well-suited for confined applications requiring an
accurate pumping range. It is not sensitive to rotation or turbulence. This
switch is voltage sensitive - use with correct voltage.
The Double Float® pump switch consists of two floats and a splice tube.
Each float contains a heavy-duty mercury switch. The splice tube contains a
holding relay which enables the floats to function in series. The holding
relay eliminates pump chatter in turbulent conditions allowing the Double
Float® pump switch to operate relay control panels for larger pump
applications.
SJE-Rhombus Double Float Pump Switch Typical Application
- Effluent and Sewage Pump Operation
SJE-Rhombus Double Float Pump Switch Technical Details
- Mercury Activated, Wide-Angle Switch Designed for Direct Control of Pumps up to 1 HP at 120 VAC and 2 HP 230 VAC
- Adjustable Pumping Range of 1.75 to 48 Inches
- 15 ft Flexible 14 Gauge Cord, 2 Conductor (UL,CSA) SJOW, Water-Resistant (CPE) Jacket
- Includes 120 or 230 VAC Piggy-Back Plug
- 15 Amps Maximum 120 VAC and 12 Amps 230 VAC
- Includes Standard Mounting Clamp and Boxed Packaging.
- UL Recognized for Use in Non-Potable Water and Sewage
- CSA Certified
- Five-Year Limited Warranty
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov