Weinman Inline Centrifugal Pump Product Description
For high volume applications requiring flows up to 1,400 GPM fthe Weinman 320 Series offers a long life solution. Suction and discharge nozzles are located 180° apart on the same centerline for mounting directly in a pipe line. This eliminates critical pipe alignment for ease of assembly and minimum pipe strain. Leak proof, self-adjusting mecanical seals and bronze wear ring(s) are supplied as standard on certain pumps. A built in purge system assures proper flushing and venting of seals. Motors are standard NEMA J and JM frame, enclosure as specified by customer.
Weinman Inline Centrifugal Pump Typical Application
- Air Conditioning
- Hydronic Heating & Cooling Systems
- Liquid Circulation
Weinman Inline Centrifugal Pump Features
- Automatic Purge System Allows Liquid to Flow from High Pressure Side of Impeller Across Seal Face to Low Pressure Eye of Impeller, Assuring Proper Lubrication and Venting. Model 6012CV Utilizes External Venting.
- Manual Vent Plug Ensures Positive Lubrication at Start Up.
- NEMA JM Frame Motors are Standard on Models Greater than 1 HP.
- Front Wear Rings on all Models. Rear Wear Rings on Certain Models.
- ANSI Flange Standard 125lbs (250lbs available)
- Mechanical Seals Eliminate Packing.
- Pressure Guage Tappings at Suction and Discharge Flanges.
- Motor can be Rotated at 90˚ Intervals for Convenient Junction Box Location.
- Drain Plug Controls Water Drainage for Easy Service
- Shaft Sleeve on JM Frame Motors
- Enclosed Bronze Impeller
See Resources for Links to the Specifications and Pump Curves.
Call customer service for more details and pricing.
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Weinman Inline Centrifugal Pump Product Resources
Download Weinman Inline Centrifugal Pumps Brochure
Download Weinman Inline Centrifugal Pumps Specifications
Download Weinman Inline Centrifugal Type CV Pump Assembly
Download Weinman Inline Centrifugal Type CV Pump Assembly (optional supports)
Download Weinman Inline Centrifugal Pump Selection Curve, 3500RPM & 1750RPM
Download Weinman Model 1507CV, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 2007CV, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 2095CV, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 2507CV, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 2595CV, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 3007CV, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 3095CV, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 4007CV, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 4095CV, 3500RPM & 1750RPM Performance Curve
Download Weinman Model 6012CV, 3500RPM & 1750RPM Performance Curve
Limited 24 Month Warranty
Crane Pumps & Systems warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for twenty-four (24) months after manufacture date, when installed and maintained in accordance with our instructions. This warranty gives you specifi c legal rights, and there may also be other rights which vary from state to state. In the event the product is covered by the Federal Consumer Product Warranties Law (1) the duration of any implied warranties associated with the product by virtue of said law is limited to the same duration as stated herein, (2) this warranty is a LIMITED WARRANTY, and (3) no claims of any nature whatsoever shall be made against us, until the ultimate consumer, his successor, or assigns, notifi es us in writing of the defect, and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply. THE SOLE AND EXCLUSIVE REMEDY FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO ANY PRODUCT SHALL BE TO REPLACE OR REPAIR AT OUR ELECTION, F.O.B. POINT OF MANUFACTURE OR AUTHORIZED REPAIR STATION, SUCH PRODUCTS AND/OR PARTS AS PROVEN DEFECTIVE. THERE SHALL BE NO FURTHER LIABILITY, WHETHER BASED ON WARRANTY, NEGLIGENCE OR OTHERWISE. Unless expressly stated otherwise, guarantees in the nature of performance specifi cations furnished in addition to the foregoing material and workmanship warranties on a product manufactured by us, if any, are subject to laboratory tests corrected for fi eld performance. Any additional guarantees, in the nature of performance specifi cations must be in writing and such writing must be signed by our authorized representative. Due to inaccuracies in field testing if a conflict arises between the results of field testing conducted by or for user, and laboratory tests corrected for field performance, the latter shall control. RECOMMENDATIONS FOR SPECIAL APPLICATIONS OR THOSE RESULTING FROM SYSTEMS ANALYSES AND EVALUATIONS WE CONDUCT WILL BE BASED ON OUR BEST AVAILABLE EXPERIENCE AND PUBLISHED INDUSTRY INFORMATION. SUCH RECOMMENDATIONS DO NOT CONSTITUTE A WARRANTY OF SATISFACTORY PERFORMANCE AND NO SUCH WARRANTY IS GIVEN. This warranty shall not apply when damage is caused by (a) improper installation, (b) improper voltage (c) lightning (d) excessive sand or other abrasive material (e) scale or corrosion build-up due to excessive chemical content. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective parts. Neither will we accept charges incurred by others without our prior written approval. This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES,INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, RENTED EQUIPMENT, OUTSIDE CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval