Prev Next

Zoeller 641-0026 Model J641 Sewage Waste Dewatering Non-Clog Pump 3.0 HP 200V 3PH 35' Cord Horizontal Discharge

Price: $5,304.00
Quantity:
+ -
Usually ships within 3 weeks
SKU: ZLR641-0026


Shipping Weight:
257.0 LBS
Shipping Dimensions
Length: 17 In
Width: 18 In
Height: 30 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

zoeller-logo.jpg

Zoeller J641 Series Sewage & Dewatering Pump Description

The "Sewage-Waste" series of submersible pumps is designed for use in commercial dewatering and wastewater applications and can be used to transfer wastewater or unscreened raw sewage. The semi-open reversing impeller design reduces the risk of clogging and allows each pump to pass a 2½" (63mm) spherical solid. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion, and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feture in every pump of this series, making it one of the most reliable in the industry.

Zoeller J641 Series Sewage & Dewatering Pump Features and Benefits

  • 30 Cast Iron Construction
  • All Units are Double Seal for Extra Motor Protection
  • Corrosion Resistant Powder Coated Epoxy Finish
  • Stainless Steel Screws, Washers, Tag and Seal Assembly
  • Oil Filled, Hermetically Sealed Motor with Heavy Duty Finned Motor Housing for Added Heat Dissipation
  • Continuous Duty Operation in Submerged Conditions
  • Maximum Temperature for Sewage or Dewatering: 104°F (40°C) with 1.2 Service Factor
  • 416 Stainless Steel Motor Shaft
  • Stainless Steel Fitted Tandem Shaft Seals, Carbon Ceramic SealFaces
  • 4” Horizontal Flanged Discharge
  • Control Panels with Overload Protection Available
  • Non-Automatic for Variable Level Control Systems

Zoeller 641-0026 Sewage & Dewatering Pump Specifications

  • VOLTAGE: 3ø, 200V, 60Hz
  • HORSEPOWER: 3.0 HP
  • AMP DRAW (full load): 11.0
  • MOTOR TYPE: Capacitor Start, Capacitor Run
  • RPM: 1750
  • MAXIMUM HEAD: 43'
  • MAXIMUM CAPACITY: 460 GPM
  • SWITCH TYPE: Manual
  • DISCHARGE PIPE SIZE: 4" Horizontal Flange Discharge
  • MAXIMUM SOLIDS HANDLING SIZE: 2-1/2" Spherical Solid
  • IMPELLER TYPE: Ductile Iron, Semi-Open
  • CORD LENGTH: 35' Type UL Listed, 3-Wire Cord
  • BODY CONSTRUCTION: Cast Iron
  • MAXIMUM LIQUID TEMPERATURE: 104°F (40C)
  • DUTY RATING: Continuous

Zoeller Model J641 Performance Curve

600-series-performance-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Zoeller Limited Warranty

Manufacturer warrants, to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of one year from date of purchase by the end user, or 18 months from date of original manufacture of the product, whichever comes first. Parts that fail within the warranty period, one year from date of purchase by the end user, or 18 months from the date of original manufacture of the product, whichever comes first, that inspections determine to be defective in material or workmanship, will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or act of God; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement, mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Service Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned