Prev Next

SJE-Rhombus Model 32S 3-Phase Duplex Motor Contactor Control Panel

Price: $4,658.40
Quantity:
+ -
Usually ships within 4 days
SKU: CP-SJE32S1059959
Voltage, Pump Amperage, Number of Floats, Special Instructions *
Max: 250 character(s)
Enclosure Rating:

Panel Options, Select all that are standard and that apply:

Update price


Shipping Weight:
30.0 LBS
Shipping Dimensions
Length: 18 In
Width: 12 In
Height: 24 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

sjerhombuslogo6002018.jpg

SJE-Rhombus Model 32S - Three Phase Duplex Pump Control Panel Description

The Model 32S control panel is designed to alternately control two three phase pumps in industrial and commercial water and sewage systems using the robust DPC-4F Pump Control Four Float Controller for pump sequence, alternation, selection, lag pump delay time and alarm.

If a high water alarm condition occurs, the high water alarm float activates the audible/visual alarm system along with auxiliary contacts for remote alarm. Common applications include lift stations and pump chambers. Models available with intrinsically safe relay for circuit extension into hazardous locations.

SJE-Rhombus Model 32S - Three Phase Duplex Pump Control Panel Features

    Panel Features:
  • Padlockable NEMA 4X Stainless Steel Enclosure
  • Single-Point Incoming Power Connection
  • IEC HP Rated Motor Starter with Adjustable Overload Module
  • 10HP Max @ 208V; 240V; 480V Three Phase
  • Class 10 Ambient Compensated Overload Relay
  • Pump Short Circuit Disconnect and Overload Reset Accessible Through the Inner Door
  • Tri-Voltage Step-Down Control Transformer
  • Separate Alarm/Control Fuses
  • Override Circuit to Operate Lag Pump if Lead Float Fails
  • Alternator Relay for Even Run Time
  • 22mm Pilot Devices with Engraved Labels
  • Seal Leak Circuits for Single or Double Probe Pumps
  • Red Flashing Alarm Beacon and Audible Horn
  • Pump Run Indicator Lights (Green)
  • Seal Leak Indicator Lights (Red)
  • Alarm Silence/Test Push Button
  • Hand-Off-Auto Selector Switches
  • Overtemp Shutdown for Motor Winding Temperature Switches (auto reset)
  • 16 AWG MTW Control Wire
  • Lag Delay Timing Relay
  • Elapsed Time Meters
  • Auxiliary Alarm Contact
  • Overload Modules (sold separately, each panel requires two modules):
    • Overload Module, 1.25-5.0 FLA
    • Overload Module, 4.5-18.0 FLA
    • Overload Module, 8.0-32.0 FLA
    OPTION: Lighting Arrestor
  • UL/cUL Listed
  • Five-Year Limited Warranty

SJE-Rhombus Model 32S - Three Phase Duplex Pump Control Panel Specifications

    INNER DOOR FEATURES

    Inner Door Provides a Degree of Safety for Panel Operation

  1. Hand/Off/Auto Switches (22mm) for Manual Pump Control (mounted on inner door)
  2. Elapsed Time Meters Provide Time Monitoring of Pump Operation (mounted on inner door)
  3. Green Pump Run Indicator Lights (22mm) Identify Pump Called to Run Condition (mounted on inner door)
  4. Adjustable Seal Fail Module Provides Dual Pump Seal Inputs and Two Red Seal Fail Indicators (mounted on inner door)
  5. Inner Door Provides Added Safety for Panel Operation
    PANEL COMPONENTS
  1. Enclosure Measures 20"x16"x8" Type 4X Stainless Steel or Type 4X Fiberglass 18"x16"x10" with Mounting Feet (for indoor or outdoor use).
  2. Padlockable Latch Provides Added Safety.
  3. IEC HP Rated Motor Starters Perform Contactor/Circuit Breaker Function, Up to 32 FLA (requires separate overload modules). Provides Location for Field Wiring of Incoming Power and Pumps.
  4. Multi-Tap Transformer (208/230/460 VAC primary) Provides 120VAC Control/ Alarm Voltage Along with Primary and Secondary Fusing.
  5. Class 10 Ambient Overload Modules (purchased separately) Provide Overload Short Circuit, Phase Failure-Phase Imbalance and Ground Fault Protection (equipment protection only); Accessible Through Inner Door (two overload modules required, field installation required).
  6. DPC-4F Controller Sequences Pumps On and Off in Response to Change in Level Input Provided by the Float Switches. The Controller also Provides Pump Alternation Selection ( Alt, 1-2, 2-1), Lag Pump Delay Time (0-60 seconds), and Provides the High Water Alarm and Float Out-of-Sequence Alarm Conditions. For Float Out of Sequences, the Controller will Reassign Float Designation for Continued Operation, until the Float Condition has Cleared.
  7. Terminal Blocks Provides Location for Field Wiring of Floats, Auxiliary Alarm Contact, Seal Fail and Thermal Cutout for Each Pump.
  8. Ground Bar Provides Location for Field Wiring Ground Wires Incoming Power and Pumps.
  9. Auxiliary Alarm Relay Provides Normally Open Contacts for Activation of Remote Devices During High Water Condition.
  10. Red LED Beacon Provides 360 Degree Visual Check of Alarm Condition.
  11. Alarm Horn Provides Audio Warning of Alarm Condition 95 decibel rating). (Not Shown)
  12. Exterior Test/Silence Button (22mm) Allows Horn and Light to be Tested and Horn to be Silenced in an Alarm Condition. Alarm Automatically Resets Once Alarm condition is Cleared.
  13. INTRINSICALLY SAFE MODELS
  14. Intrinsically Safe 4-Channel Module Limits the Amount of Energy to Float Switches Preventing Ignition of Flammable Gases.

Note: Schematic/Wiring Diagram and Pump Specification Label; are Located Inside the Panel

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SJE Rhombus Limited Warranty Policy

Five-Year Limited Warranty Policy We Stand Behind Our Products!

Effective for products manufactured after January 1, 2014

SJE-Rhombus warrants to the original consumer that this product shall be free of manufacturing defects for five years* after the date of consumer purchase. During that time period and subject to the conditions set forth below, SJE-Rhombus will repair or replace, for the original consumer, any component which proves to be defective due to defective materials or workmanship of SJE-Rhombus.

THE FIVE-YEAR LIMITED WARRANTY DOES NOT APPLY TO THE MOTOR START KIT COMPONENTS. SJE-RHOMBUS WILL WARRANTY MOTOR START KIT COMPONENTS, SUPPLIED BY SJE-RHOMBUS FOR ONE YEAR. SJE-RHOMBUS MAKES NO WARRANTIES OF ANY TYPE WITH RESPECT TO MOTOR START KITS SUPPLIED BY A CUSTOMER.

SJE-Rhombus warrants to the original consumer that this product shall be free of manufacturing defects for five years* after the date of consumer purchase. During that time period and subject to the conditions set forth below, SJE-Rhombus will repair or replace, for the original consumer, any component which proves to be defective due to defective materials or workmanship of SJE-Rhombus.

THE FIVE-YEAR LIMITED WARRANTY DOES NOT APPLY TO THE MOTOR START KIT COMPONENTS. SJE-RHOMBUS WILL WARRANTY MOTOR START KIT COMPONENTS, SUPPLIED BY SJE-RHOMBUS FOR ONE YEAR. SJE-RHOMBUS MAKES NO WARRANTIES OF ANY TYPE WITH RESPECT TO MOTOR START KITS SUPPLIED BY A CUSTOMER.

ELECTRICAL WIRING AND SERVICING OF THIS PRODUCT MUST BE PERFORMED BY A LICENSED ELECTRICIAN.

This warranty does not apply to: (a) damage due to lightning or conditions beyond the control of SJE-Rhombus; (b) defects or malfunctions resulting from units not installed, operated, or maintained in accordance with instructions provided, applicable local codes, ordinances, or accepted trade practices; (c) failures resulting from abuse, misuse, accident, or negligence; or (d) units repaired and/or modified without prior authorization from SJE-Rhombus.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

TO OBTAIN WARRANTY SERVICE: The consumer shall assume all responsibility and expense for removal, reinstallation, and freight. Any item to be repaired or replaced under this warranty must be returned to SJE-Rhombus, or such place as designated by SJE-Rhombus. Contact customer service at 1-888-DIAL-SJE (1-888-342-5753) for a Return Materials Authorization number (RMA) on any product being returned for a warranty claim.

ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. SJE-RHOMBUS SHALL NOT, IN ANY MATTER, BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES AS A RESULT OF A BREACH OF THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY.

*Build-A-Panel™ Plus Control Panels and Engineered Custom panels carry a two-year limited warranty (or as quoted). The pressure transducer included with VARIOspeed® products carries a one-year limited warranty.

We've been helping customers since 1953

Trust Guard Security Scanned