Zoeller Model E4140 Sump & Effluent Pump Description
The "Flow-Mate" series of submersible pumps is designed for use in residential
or light commercial dewatering applications and can be used to transfer
groundwater or effluent. These durable cast iron pumps include a powder
coated epoxy finish to prevent corrosion and are designed to provide great heat
dissipation from the motor, ensuring a long service life. As with every Zoeller
pump, each one is 100% pressure-tested, submerged and run to ensure quality
and reliability for years of trouble-free performance! This attention to detail is an
inherent feature of every pump in this series, making it one of the most reliable
in the industry.
Zoeller Model E4140 Sump & Effluent Pump Features and Benefits
-
Durable Cast Iron Construction
-
Features a Non-Clogging, Engineered Thermoplastic Vortex
Impeller Design and Passes 1/2" (13mm) Spherical Solids
-
Oil Filled and Hermetically Sealed, Automatic Reset Thermal
Overload Protection
- Available in Both Single and Double Shaft Seal Designs
- Carbon/Ceramic Mechanical Shaft Seals
-
Stainless Steel Bolts and Lifting Handle
-
1-1/2" NPT Vertical Discharge
-
Operates at 130°F (54°C) in Effluent or Dewatering
Applications
-
Corrosion-Resistant, Powder Coated Epoxy Finish
Zoeller 4140-0012 Sump & Effluent Pump Specifications
- VOLTAGE: 1ø, 230V, 60Hz
- HORSEPOWER: 1.0 HP
- AMP DRAW (full load): 6.0
- MOTOR TYPE: Permanent Split Capacitor (PSC)
- RPM: 3450 RPM
- MAXIMUM HEAD: 50'
- MAXIMUM CAPACITY: 86 GPM
- SWITCH TYPE: Manual
- DISCHARGE PIPE SIZE: 1-1/2" NPT
- MAXIMUM SOLIDS HANDLING: 1/2" Spherical Solid
- IMPELLER TYPE: Engineered Thermoplastic, Non-Clogging Vortex
- CORD LENGTH: 35' Type UL Listed, Neoprene w/ Molded Plug Cap & Ground Wire
- BODY CONSTRUCTION: Cast Iron
- MAXIMUM OPERATING TEMPERATURE: 130°F (54C)
Zoeller Model E4140 Performance Curve
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov