Prev Next

Barmesa SH6-4TNV98C Self-Priming Centrifugal Trash Pump 67.6 HP

Price: $47,178.00
Quantity:
+ -
Usually ships within 3 weeks
SKU: BMS62020302
Pump Options:


Update price


Shipping Weight:
800.0 LBS
Shipping Dimensions
Length: 120 In
Width: 62 In
Height: 77 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Barmesa SH6-4TNV98C Self-Priming Centrifugal Trash Pump

Self-Priming Centrifugal Trash Pump are designed for dewatering and trash applications with solids handling capability.

*Base or Wheel Mounted Available.

Barmesa SH6-4TNV98C Self-Priming Centrifugal Trash Pump Features

  • Cast Iron ASTM A-48, Class 30 Casing with Maximum Pressure of 79 PSI.
  • Brass Pressure Relief Valve
  • SAE no. 30 Non Detergent Oil, Pump Includes Oil Level Sight Gauges.
  • Alloy Steel no.4140 Shaft
  • Replaceable Carbon Steel Wear Plate
  • Steel Reinforced Neoprene Flap Valve
  • Seal is Silicone Carbide Rotating and Stationary Faces, Fluorocarbon Elastomers (Viton® or Equivalent). 36 Stainless Steel Cage and Spring.
  • 6.0" NPT, 125lb, Female Flange Discharge and 6.0" 125lb, Female Flange Suction
  • Temperature Rating: 160°F (71°C)
  • Engine Specifications
    • 67.6 HP
    • 2500 RPM
    • 4 Cylinder, 4 Cycle, Liquid Cooled Diesel Engine

Barmesa SH6-4TNV98C Self-Priming Centrifugal Trash Pump Specifications

  • DISCHARGE SIZE: 6.0" NPT, 125 lbs., Female Flange
  • INLET SIZE: 6.0" NPT, 125 lbs., Female Flange
  • MAXIMUM CAPACITY: 1200 GPM
  • MAXIMUM HEAD: 120'
  • ENGINE: Honda, 4 Cylinder, 4 Cycle, Liquid Cooled Diesel, Final Tier 4
  • IMPELLER MATERIAL: 2 Vane, Open, Ductile Iron
  • MAXIMUM SOLIDS HANDLING SIZE: 3.0"
  • BODY CONSTRUCTION: Cast Iron ASTM A-48, Class 30
  • HORSEPOWER: 67.6 HP
  • MAXIMUM LIQUID TEMPERATURE: 160°F (71°C)
  • SELF PRIMING: YES

Barmesa SH6-4TNV98C Self-Priming Centrifugal Trash Pump Performance Curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Barmesa SH6-4TNV98C Self-Priming Centrifugal Trash Pump Product Resources

product-resourcesb.png

Download Barmesa SH6-4TNV98C Self-Priming Centrifugal Trash Pump Catalog Sheet

BARMESA PUMPS FACTORY WARRANTY


Barmesa Pumps warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for 18 months from date of manufacture or 12 months from installation date whichever occurs first. This warranty gives you specific legal rights,which vary from state to state.

This warranty is a limited warranty, and no warranty related claims of any nature whatsoever shall be made against Barmesa Pumps, until the ultimate consumer or his/her successor notifies us inwriting of the defect and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station as instructed by Barmesa Pumps. THERE SHALL BE NO FURTHER LIABILITY. WHETHER BASED ON WARRANTY. NEGLIGENCE OR OTHERWISE. PRODUCT SHALL BE EITHER REPLACED OR REPAIRED AT THE ELECTION OF BARMESA PUMPS. Guarantees relating to performance specifications provided in addition to the foregoing material and workmanship warranties on a product manufactured by Barmesa Pumps, if any, are subject to possible factory testing. Any additional guarantees, in the nature of certified performance specifications or time frame must be inwriting and such writing must be signed byour authorized factory manager at time of order placement and/or at time of quotation. Due to inaccuracies in field testing and should a conflict arises between the results of field testing conducted by or for the user, Barmesa Pumps reserves the right to have the product returned to our factory for additional testing.

This warranty shall not apply when damage is caused by (1) improper installation, (2) improper voltage, (3) lightning, (4) excessive sand or other abrasive material, (5) corrosion build-up due to excessive chemical content or (6) uncontrollable acts of god. Any modification of the original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective pumps, parts or systems. Barmesa Pumps will not accept charges incurred by others without our prior written approval.

This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for communication of all necessary information regarding the application and use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, CONTRACTOR FEES, UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY. No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval.

IMPORTANT!

If you have a claim under the provision of the warranty, contact Barmesa Pumps or your authorized Barmesa Pumps Distributor:

warranty@barmesapumps.com

www.barmesapumps .com

We've been helping customers since 1953

Trust Guard Security Scanned