Our Blog

Zoeller Model E810 Grinder Pump Description Our Model 810 Progressing Cavity Grinder Pump is designed to pump raw sewage in sewage ejector applications when pumping to pressurized sewer main. Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology. This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8?. The E810, should use a control panel and control switches allowing it to turn the pump on when...

Our Model M95 Sump Pump is fully automatic 1/2 HP pump for use in high flow basement sump applications. This pump is packed with features, including the most advanced switch technology available. The green LED plug allows you to see that it has power even when it is installed in a dark basement or crawl space. By design, the solid float cannot become waterlogged. So, it is always buoyant and able to turn the pump on when necessary. The identification tag, float guard, handle, switch arm and...

Zoeller AquaNot® Spin 508 Backup Pump System Description Our AquaNot® Spin 508 is a battery backup system that should be paired with a primary sump pump. The system is designed to provide premium protection in basement sump applications at a mid-level price. It comes equipped with a high-performance, high efficiency, double-sealed 12 V battery-powered sump pump designed to provide backup support to the primary sump pump. The AquaNot 508 turns on during high flow events or takes over in the...

Zoeller Control Panel 840 Duplex Description The control panel can be housed in a NEMA 4X enclosure and be of a simplex design which controls a single pump from a 3-float system or a duplex design which controls two pumps in an alternating lead/lag cycle sequence from a 3 or 4-float system. The panel contains the required starting, control, & alarm circuits. Rated motor starters and circuit breakers are required for each pump. The 115-volt control circuit will have short circuit protection....

Zoeller Model N140 Sump & Effluent Pump Description The "Flow-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to...