Prev Next

Hydromatic OSP50BRM2 Bronze Impeller Submersible Effluent Pump 0.5 HP 230V 1PH 20' Cord Manual

Price: Discontinued
+ -
Discontinued or no longer available.
SKU: HTC517941007

Hydromatic Pump Logo

Item Discontinued, See Replacement: Myers MEOSP50BRM2 Bronze Impeller Submersible Effluent Pump 0.5 HP 230V 1PH 20' Cord Manual

Hydromatic OSP50BR Description

The Hydromatic OSP50BR submersible pump is specifically designed to meet the demands of residential sump, elevator pit, septic tank effluent, industrial circulator and transfer tank applications. The 1-1/2 inch NPT discharge pump is available with a powerful 1/2 horsepower motor, and can handle capacities up to 60 gallons per minute and heads to 25 feet. The pump’s nonclogging bronze impeller, which is threaded to a stainless steel shaft, provides long life even in demanding applications, and is capable of handling up to 5/8 inch spherical solids and lint. The OSP50AB’s oil-filled motor provides superior cooling characteristics, allowing the motor to run cool and quiet for years. This oil-filled design also provides permanent lubrication of the shaft bearings, minimizing maintenance and extending the service life of the pump. In addition, to protect against overheating, the motor windings contain an automatic reset thermal overload. Water level is controlled by a proven diaphragm-type pressure switch, which is sealed in a watertight housing. Double-diaphragm construction provides added protection in preventing liquid or foreign matter from entering switch.

Hydromatic OSP50BR Typical Application

  • Continuous Duty Application
  • Septic Tank Effluent
  • Flood Control Units
  • Industrial Circulators
  • Elevator Pits
  • Basement Sumps

Hydromatic OSP50 Superior Features

  • Continuous duty rated
  • Carbon/Ceramic type 21 mechanical seal
  • Oil-filled motor with automatic reset thermal overload for maximum protection
  • Upper and lower single-row ball-bearing construction
  • Oil-filled motor
  • Manual pump operation – switch not included

Hydromatic OSP50BRM2 Technical Details

  • BODY CONSTRUCTION: Cast Iron
  • HORSEPOWER: 0.5 HP
  • RPM: 1750
  • MAXIMUM HEAD: up to 25'
  • MAXIMUM CAPACITY: up to 60 GPM
  • DISCHARGE PIPE SIZE: 1.5" NPT Discharge
  • MAXIMUM SOLIDS HANDLING SIZE: 5/8"
  • CORD LENGTH: 20' Power Cord
  • VOLTAGE: 1ø, 230V
  • FULL LOAD AMPS: 5.2
  • MOTOR: Split Phase
  • IMPELLER CONSTRUCTION: Bronze

Hydromatic OSP50 Pump Curve

Hydromatic OSP50 / OSP50AB effluent pump curve


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

pentair-hydromatic-level-4.png

HYDROMATIC warrants to the original consumer purchaser (“Purchaser” or “You”) of HYDROMATIC Sump Pumps, Effluent Pumps, Sewage Pumps (other than 2-1/2"), and Package Systems, that they will be free from defects in material and workmanship for the Warranty Period of 36 months from date of manufacture.

Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient compensated, extra-quick trip overload relays of the recommended size or the warranty is void.

Your only remedy, and HYDROMATIC’s only duty, is that HYDROMATIC repair or replace defective products (at HYDROMATIC’s choice). You must pay all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty is not transferable.

EXCEPTIONS:

Exceptions are warranted for a period of 12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Hydromatic Special Application Pumps:

  • HCU15/HCU15S/HCU20S
  • HUP
  • P33A1
  • HY106
  • HPUSP125

Battery Back-Up Sump Pumps:

  • A+ Battery Back-up
  • FG-A1
  • FG-100A
  • FG-200A

Filtered Effluent Pumps:

  • HE Series

Grinder Pumps:

  • HPGR Series

2-1/2" Sewage Pumps:

  • S3S Series
  • S4S Series
  • SB3S Series
  • SB4S Series
All accessories and repair parts

HYDROMATIC SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION EXPRESSLY PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

This warranty supersedes and replaces all previous warranty publications.

HYDROMATIC

740 East 9th Street, Ashland, OH 44805

Phone: 888-957-8677 • Fax: 888-840-7867 • Web Site: http://www.hydromatic.com

We've been helping customers since 1953

Trust Guard Security Scanned