Prev Next

Zoeller 211-0002 Model N211 Sewage Effluent or Dewatering Pump 0.4 HP 115V 1PH 15' Cord Nonautomatic

Price: $318.75
Quantity:
+ -
Usually ships within 3 weeks
SKU: ZLR211-0002


Shipping Weight:
24.0 LBS
Shipping Dimensions
Length: 15 In
Width: 10 In
Height: 16 In
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

zoeller-logo.jpg

Zoeller Model N211 Submersible Pump Description

The "Aqua-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2" (50 mm) spherical solids. These pumps are constructed of a non-corrodible engineered plastic motor housing, pump housing, base and impeller. All models are constructed with all stainless steel screws, and automatic models feature a stainless steel switch arm and a solid polypropylene float. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feture of every pump in this series, making it one of the most reliable in the industry.

Zoeller Model N211 Submersible Pump Features and Benefits

  • Non-Corrosive Engineered Plastic Motor Housing, Pump Housing, Base and Impeller
  • No Sheet Metal Parts to Rust or Corrode
  • All Stainless Steel Screws, Switch Arm and Lower Motor Housing
  • Maximum Temperature for Dewatering: 110°F (43°C)
  • Passes 2" (50 mm) Spherical Solids
  • 2" NPT Discharge
  • All Models Completely Submersible and Hermetically Sealed

Zoeller 211-0002 Submersible Pump Specifications

  • VOLTAGE: 1ø, 115V, 60Hz
  • HORSEPOWER: 0.4 HP
  • AMP DRAW (full load): 5.5
  • MOTOR TYPE: Permanent Split Capacitor (PSC)
  • RPM: 3400 RPM
  • MAXIMUM HEAD: 19.5'
  • MAXIMUM CAPACITY: 82 GPM
  • SWITCH TYPE: Manual
  • DISCHARGE PIPE SIZE: 2" NPT 
  • MAXIMUM SOLIDS HANDLING: 2" Spherical Solid
  • IMPELLER TYPE: Engineered Plastic, Non-Clogging Vortex
  • CORD LENGTH: 15' Type UL Listed, 3-Prong Plug
  • BODY CONSTRUCTION: Engineered Plastic
  • MAXIMUM OPERATING TEMPERATURE: 110°F (43C)

Zoeller Model N211 Performance Curve

211-performance-curve.jpg


WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Zoeller Limited Warranty

Zoeller products often carry warranty terms that vary in length based on the product type. Refer to the installation manual for specific warranty term.


Manufacturer warrants,to the purchaser and subsequent owner during the warranty period, every new product to be free from defects in material and workmanship under normal use and service, when properly used and maintained, for a period of one year from date of purchase. Proof of purchase is required. Parts that fail within the warranty period that inspections determine to be defective in material or workmanship will be repaired, replaced or remanufactured at Manufacturer's option, provided however, that by so doing we will not be obligated to replace an entire assembly, the entire mechanism or the complete unit. No allowance will be made for shipping charges, damages, labor or other charges that may occur due to product failure, repair or replacement.

This warranty does not apply to and there shall be no warranty for any material or product that has been disassembled without prior approval of Manufacturer, subjected to misuse, misapplication, neglect, alteration, accident or uncontrollable act of nature; that has not been installed, operated or maintained in accordance with Manufacturer's installation instructions; that has been exposed to outside substances including but not limited to the following: sand, gravel, cement,mud, tar, hydrocarbons, hydrocarbon derivatives (oil, gasoline, solvents, etc.), or other abrasive or corrosive substances, wash towels or feminine sanitary products, etc. in all pumping applications. The warranty set out in the paragraph above is in lieu of all other warranties expressed or implied; and we do not authorize any representative or other person to assume for us any other liability in connection with our products.

Contact Manufacturer at, 3649 Cane Run Road, Louisville, Kentucky 40211, Attention: Customer Support Department to obtain any needed repair or replacement of part(s) or additional information pertaining to our warranty.

MANUFACTURER EXPRESSLY DISCLAIMS LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES OR BREACH OF EXPRESSED OR IMPLIED WARRANTY; AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY.

Some states do not allow limitations on the duration of an implied warranty, so the above limitationmay not apply to you. Some states do not allowthe exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We've been helping customers since 1953

Trust Guard Security Scanned