This is where R.C. Worst & Company Inc. talks about stuff related to our industry!
Posted on Friday, September 8, 2017 by

Using a Safety Line With Submersible Well Pumps

Should I use a safety line on by submersible pump? If so what kind do you recommend?We get this question quite often when customers take on the challenge replacing their own well pump.The first thing I will mention is that we do not generally use a safety line when installing well pumps. There are however a few specific cases that we would use a safety line, if for example we were installing a well pump using poly pipe. If the pump were to become deadheaded with poly pipe, the pump could heat...

Continue Reading
Posted on Wednesday, August 30, 2017 by

Float Switches

Is my sump pump doing it’s job when I listen to heavy rain in the middle of the night?When I flush the toilet how do I know that my septic system is working as intended? Without actually looking down the basin of the sump pump or inside your septic tank there is no way to know with 100% certainty. However, having the right systems in place can, hopefully, give you the peace of mind that there is no need to worry.Float switches are the most important feature of any pumping system. Float switches...

Continue Reading
Posted on Friday, August 25, 2017 by

How to Select the Right Pump Switch for the Job

There are a number of different pump switches you will encounter when searching for which submersible pump to buy. In this post we’ll explain pump switch operation, terms, and the pros and cons of the 3 most common types.What is a “Float Switch”? A float switch is a device that monitors the liquid level in a tank or sump. Inside the sealed float housing is a set of contacts that, when closed, will complete an electrical circuit. They are used to activate and deactivate pumps, alarms, timers,...

Continue Reading
Posted on Wednesday, August 23, 2017 by

Understanding Float Switches

What is a “Float Switch”? A float switch is a device that monitors the liquid level in a tank or sump. Inside the sealed float housing is a set of contacts that, when closed, will complete an electrical circuit. The circuit can be completed by either mechanical or mercury means. They are used to activate and deactivate pumps, alarms, timers, etc. Pump Switch Vs. Control Switch When controlling a pump directly, a pump switch can be wired directly into the motor housing, spliced into the pump’s...

Continue Reading
Posted on Wednesday, August 16, 2017 by

Onsite Versus Traditional Septic System

Onsite Septic Systems and RCWSWWW (RC Worst Septic-Wise Words of Wisdom) Homes or other structures that are hooked up to an aging central sewer system have no control of the impact of the wastewater after it leaves the property. For every foot that untreated wastewater travels it increases the chances of finding a leaky pipe and, therefore, contaminating soil or water. The property may also be letting go of value nutrients that could benefit its local ecosystem.Four percent of the nation’s...

Continue Reading

We've been helping customers since 1953

Trust Guard Security Scanned