This is where R.C. Worst & Company Inc. talks about stuff related to our industry!
Posted on Wednesday, December 26, 2018 by

Pressure Switch Troubleshooting & Maintenance

If you’re having issues with your well pump not starting, not starting consistently, or starting too often, the first thing to check is your pressure switch. With the power OFF, take the lid off to do a visual inspection. To ensure the power is off, be sure to check it with a volt-meter first. -Check/clean contact points -Tighten all screws Tip: Always use forked wires to connect to the terminals instead of bare threaded wire. If stranded wire is your only option, make sure that the wire is...

Continue Reading
Posted on Friday, December 21, 2018 by

How to Install Risers and Lids on Concrete Septic Tanks w/ Square Hole

Installing risers and lids will allow for easy access for inspection, repairs, and septic tank pumping. While there is an up front cost, it can be offset over time by the cost to locate and dig everytime you need access to the tank. Determine Riser Height. Tank risers are typically installed about 3 inches above grade. Having the lid above grade will make it easy to find, however, some will choose to have the lid just a couple of inches below grade so that is easier to mow over and less...

Continue Reading
Posted on Wednesday, December 19, 2018 by

Employee Spotlight: Dave Nelson - Technical Sales - Coeur d’Alene, ID

When Dave isn’t out skiing the local mountains or hanging out at the lake with his family he’s busy providing outstanding customer service as a member of our technical sales team. This Seattle native enjoys spending time with his wife and five kids, wine tasting, and cheering on his kid’s soccer teams. Dave believes we should never stop learning and takes great pride in seeking out ways to further his knowledge and continue his education, specifically to keep up with changes in the water and...

Continue Reading
Posted on Monday, December 17, 2018 by

How to Install Risers and Lids on Concrete Septic Tanks w/ Round Hole

Installing risers and lids will allow for easy access for inspection, repairs, and septic tank pumping. While there is an up front cost, it can be offset over time by the cost to locate and dig everytime you need access to the tank. Determine Riser Height. Tank risers are typically installed about 3 inches above grade. Having the lid above grade will make it easy to find, however, some people will choose to have the lid just a couple of inches below grade so that is easier to mow over and less...

Continue Reading
Posted on Friday, December 14, 2018 by

How to Care for Your Septic System

Septic system maintenance is not complicated, and it does not need to be expensive. Upkeep comes down to four key elements:-Inspect Regularly and Pump as Needed-Use Water Efficiently-Properly Dispose of Waste-Maintain Your DrainfieldInspect Regularly and Pump as NeededThe average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years. Alternative systems with electrical float...

Continue Reading

We've been helping customers since 1953

Trust Guard Security Scanned